Search
Now showing items 1-10 of 20077
AASHTO HDG CHAPTER 2: HYDROLOGY - 4th edition
Abstract: of such studies should be commensurate with the hazard associated with the facilities and with other economic, engineering, social, and environmental concerns. While performing the hydrologic analysis and hydraulic design of highway drainage facilities...
AASHTO M 144: Standard Specification for Calcium Chloride
Abstract: This specification covers technical grade calcium chloride used for pretreatment of and deicing road surfaces, dust control, stabilizing and conditioning road surfaces, and for accelerating the set of concrete not reinforced ...
AASHTO T 255: Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying
Abstract: with the minerals in the aggregate. Such water is not evaporable and is not included in the percentage determined by this test method.
The values stated in SI units are to be regarded as the standard. The values stated in parentheses are provided for information...
The values stated in SI units are to be regarded as the standard. The values stated in parentheses are provided for information...
AASHTO GSDFPB: GUIDE SPECIFICATIONS FOR DESIGN OF FRP PEDESTRIAN BRIDGES - Revision 1
Abstract: GENERAL
These Guide Specifications shall apply to fiber reinforced polymer (FRP) composite bridges intended to carry primarily pedestrian and/or bicycle traffic. Unless amended herein, the existing provisions of the AASHTO...
These Guide Specifications shall apply to fiber reinforced polymer (FRP) composite bridges intended to carry primarily pedestrian and/or bicycle traffic. Unless amended herein, the existing provisions of the AASHTO...
AASHTO TP 95: Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
Abstract: correlations have been established between this test procedure and long-term chloride diffusion procedures such as those described in ASTM C 1556. Examples of such correlations are discussed in the reference shown in Section 15.2.
The values stated in SI...
The values stated in SI...
AASHTO TP 117: Standard Method of Test for Determination of the Voids of Dry Compacted Fille
Abstract: This document specifies the procedure for determining the voids of dry compacted filler by means of a Rigden Apparatus. This test allows for measuring the percent volume of free asphalt that a filler can carry. The test is applicable to natural and manufactured fillers.
The values stated in SI units are to be regarded as the standard.
This ...
The values stated in SI units are to be regarded as the standard.
This ...