Search
Now showing items 21-30 of 1083
ASME B18.31.4M: Threaded Rod (Metric Series)
Abstract: INTRODUCTION
This Standard covers the complete general and dimensional data for metric series threaded rod recognized as an American National Standard. This Standard is applicable to both fine and ...
This Standard covers the complete general and dimensional data for metric series threaded rod recognized as an American National Standard. This Standard is applicable to both fine and ...
ASME PTC 2: Definitions and Values Performance Test Codes
Abstract: This Code contains standards for terms, units of measure, values of constants, symbols, and technical nomenclature that are to be used in all individual test codes. The implication of the words "must," "shall," and "will" is mandatory. The use of "should," "would," and "ought" denotes recommended practice. All the information contained herein repre...
ASME B18.27: Tapered and Reduced Cross Section Retaining Rings (Inch Series) - Incorporating ASME B18.27.1, B18.27.2, B18.27.3, B18.27.4, and B18.27.5; Addenda A - 1999; Addenda B - 11/15/2000
Abstract: This Standard covers complete general and dimensional data for three series of general purpose tapered and reduced cross section retaining rings, which may be used with the nominal size shafts and housings listed and ...
ASME B18.3.4M: Hexagon Socket Button Head Cap Screws (Metric Series)
Abstract: This Standard contains the complete general and dimensional requirements for Metric Series Hexagon Socket Button Head Cap Screws of nominal sizes from 3 mm to 16 mm recognized as an American National Standard. Also included ...
ASME PTC 70: Ramp Rates
Abstract: This Code is applicable to all electrical generating facilities, independent of fuel source or prime movers.
This Code is directed at providing guidelines for measuring the machinery impact of controlled transients ...
This Code is directed at providing guidelines for measuring the machinery impact of controlled transients ...
ASME B89.4.10: Methods for Performance Evaluation of Coordinate Measuring Systems Software - Erratum September 2003
Abstract: A critical issue in industrial coordinate metrology is the measurement of a work piece to assure compliance with its dimensional requirements. When using a computerized Coordinate Measurement System (CMS), the usual ...
ASME PTC 36: Measurement of Industrial Sound
Abstract: The scope of this Code includes measurement procedures in a variety of acoustical environments, including outdoor settings influenced by background noise. Generally, sound pressure levels and/or sound power levels in ...
ASME PTC 20.3: Pressure Control Systems Used on Steam Turbine-Generator Units
Abstract: OBJECT AND SCOPE
The purposes of this Code are:
To establish guiding principles and provide a format for performance specifications for pressure control systems applicable to the equipment covered under ...
The purposes of this Code are:
To establish guiding principles and provide a format for performance specifications for pressure control systems applicable to the equipment covered under ...
ASME B31.12: Hydrogen Piping and Pipelines
Abstract: This Code is applicable to piping in gaseous and liquid hydrogen service and to pipelines in gaseous hydrogen service. This Code is applicable up to and including the joint connecting the piping to associated pressure vessels and equipment but not to the vessels and equipment themselves. It is applicable to the location and type of support elements...
ASME B18.16.6: Nylon Insert Locknuts (Inch Series)
Abstract: This Standard covers the complete general, dimensional, mechanical, and performance data for carbon steel, inch series nylon insert locknuts of property grades NE2, NE5, and NE8 designated as American National Standard. ...