Search
Now showing items 1-10 of 10
MIL-PRF-24712A: COATINGS, POWDER (METRIC)
Abstract: This specification covers powder coatings for interior steel, aluminum, copper-nickel and bronze equipment, furniture, and electrical box surfaces and on exterior steel, aluminum, copper-nickel, and bronze surfaces exposed ...
MIL-DTL-3100H: WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES
Abstract: This specification covers road wheels, track support rollers, and idler wheels for use on military track laying vehicles. These are metal wheels with bonded solid elastomer tires (see 6.1). Intended Use: ...
MIL-PRF-16173E INT AMD 1: CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
Abstract: This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.Intended Use: The corrosion preventive compound covered by ...
MIL-H-22240F: HOSE, RUBBER, PETROLEUM BASED FUELS AND WATER SERVICES, DISCHARGE ONLY, SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE
Abstract: This specification covers lightweight, smooth bore, petroleum based fuels and water service discharge rubber hoses. Intended Use: Hose is intended for use in, but not limited to, refueling-at-sea. The maximum ...
MIL-DTL-20078D: GASKET, FOR BALLISTIC DOORS AND HATCHES
Abstract: This specification establishes the requirements for metal inserted rubber gaskets and two-line rubber gaskets for ballistic doors and hatches (see 6.1). Intended Use: Types A-1 and A-2 gaskets are ...
MIL-DTL-20176G: HOSE AND HOSE ASSEMBLY, RUBBER, SMOOTH BORE, LIGHT-WEIGHT SEWAGE DISCHARGE AND OILY WASTE DISCHARGE
Abstract: This specification covers smooth bore, sewage discharge, and oily waste discharge rubber hose and hose assemblies.
Sewage hose and oily waste will be of the following types, classes, and sizes, as specified (see ...
Sewage hose and oily waste will be of the following types, classes, and sizes, as specified (see ...
MIL-PRF-16173E: CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
Abstract: This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.
Corrosion preventive compounds covered by this specification are ...
Corrosion preventive compounds covered by this specification are ...
MIL-STD-3021 CHG 1: MATERIALS DEPOSITION, COLD SPRAY
Abstract: Purpose. The procedures covered by this standard are intended to ensure that cold spray coating operations, either manual or automated, meet prescribed requirements. This process can be used to restore dimensionally ...
MIL-HDBK-803: GLASS REINFORCED PLASTICS PREVENTIVE MAINTENANCE AND REPAIR
Abstract: This handbook provides guidance for preventive maintenance of glass reinforced plastic (GRP) items, as well as instructions and illustrations on proper repair techniques for minor damage to reinforced plastic structures. ...
MIL-DTL-24211C: GASKETS, WAVEGUIDE FLANGE GENERAL SPECIFICATION FOR
Abstract: This specification covers the general requirements for pressure sealing gaskets used with general purpose cover flanges and flat face flanges covered by MIL-DTL-3922.Intended Use: The gaskets covered by this ...