Recent Submissions

  • IEEE 3D Body Processing Industry Connection--Assets and Transformations Definitions 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Five unified definitions for the 3D Body Processing ecosystem were created to harmonize resource exchange to enable or improve interoperability, communication, and security, thereby facilitating reformations across sectors ...
    Subject(s) : 3DBP , Industry Connections , assets , white paper , definitions , transformations ,
  • IEEE Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Described in this recommended practice are very low frequency withstand and diagnostic tests that are performed on the stator windings of ac electric machines.
    Subject(s) : withstand test , diagnostic test , high-potential (hipotential) test , very low frequency testing , proof testing , safety , ac electric machines , ac electric machine testing , VLF testing , IEEE 433 , over potential test ,
  • IEEE Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High- Temperature Insulation Systems 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Covered in this standard are all liquid-immersed distribution, power, and regulating transformers that are designed to operate at temperatures that exceed the normal thermal limits of IEEE C57.12.00 under continuous load, ...
    Subject(s) : high-temperature , hybrid , conventional , insulation system , IEEE C57.154 ,
  • IEEE Guide for Early Detection, Mitigation, Preventative Measures, and Response to Smoke, Fire, and Explosions in Underground Electrical Structures 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Abstract: Failures of underground cables and accessories can result in the release of toxic gases and large amounts of energy. These failures include smoking manholes, manhole fires, and manhole explosions. These failure ...
    Subject(s) : smoking manhole , manhole fire , manhole explosion , IEEE 2417 , arcing faults , manhole events ,
  • IEEE Standard for Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Criteria that establish protection requirements for Class 1E power systems and equipment are prescribed in this standard. The purpose of and the means for obtaining protection from electrical and mechanical damage, or ...
    Subject(s) : nuclear power generating stations , Class 1E , electrical equipment , protection , power systems , IEEE 741 ,
  • IEEE Standard for Sanitizing Storage 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Methods of sanitizing logical storage and physical storage, as well as providing technology-specific requirements and guidance for the elimination of recorded data, are specified in this standard.
    Subject(s) : crypto scramble , sanitize , data destruct , media sanitization , crypto erase , sanitization , purge , security , destroy , data removal , cryptographic erase , clear , IEEE 2883 ,
  • IEEE Guide for Using IEEE Std 1547 for Interconnection of Energy Storage Distributed Energy Resources with Electric Power Systems 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Application of IEEE Std 1547-2018 to the interconnection of energy storage distributed energy resources (ES DER) to electric power systems (EPSs) is described in this guide. Along with examples of such interconnection, ...
    Subject(s) : islanding , interoperability , distributed energy resources , operational state of charge , bidirectional , ES DER response prioritization , testing , safety , IEEE 1547 , fast frequency response , black start participation , state of charge , operational model , active power export , monitoring , energy storage , charging , vehicle-to-grid , use cases , operational capacity , discharging , frequency droop response , electric power systems , energy storage distributed energy resources , inertial response , interconnection requirements and specifications , reactive power capability , IEEE 1547.9 , secondary networks , ride-through , exemptions ,
  • Industry Connections Program--Need for Establishing Industrial AI Maturity Levels 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: This white paper touches upon some important focus areas that can be of help in establishing a framework for determining industrial AI maturity levels. This includes establishing both technical as well as organizational ...
    Subject(s) : Industry Connections , white paper , AI maturity , maturity levels , standardization ,
  • IEEE Standard for Harmonic Control in Electric Power Systems 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Goals for the design of electrical systems that include both linear and nonlinear loads are established in this standard. The voltage and current waveforms that may exist throughout the system are described, and waveform ...
    Subject(s) : steady-state , harmonics , IEEE 519 , power quality ,
  • IEEE Standard for Entity-Based Risk Mutual Assistance Model through Blockchain Technology 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: The standard defines the Entity Risk Mutual Assistance Model (RMAM) based on blockchain technology, including the involved entities of interest, the relationship between entities, organizational framework, and design method.
    Subject(s) : credit body , hybrid blockchain network , multi-center autonomous organization , IEEE 2146.1 , dynamic trust , blockchain ,
  • IEEE Standard for Ethernet 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 400 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense ...
    Subject(s) : multimode fiber , 40 Gigabit Ethernet , DTE Power via the MDI , MMF , isolation , PHY , Physical Layer , PCS , PMD , point to multipoint , EPoC , Multi-Channel Reconciliation Sublayer , PD , Physical Layer Collision Avoidance , PoDL , 2.5 Gigabit Ethernet , 200 Gigabit Ethernet , EEE , EPON , EPON protocol over coax , Fast Ethernet , data processing , Ethernet in the first mile , balanced cable , MIB , local area network , MCRS , PoE , Ethernet , Auto-Negotiation , FEC , PMA , RS , MPCP , physical medium dependent , Backplane Ethernet , repeater , management , SMF , physical medium attachment , MII , AN , Ethernet Passive Optical Network , Power Sourcing Equipment , express traffic , Power over Data Lines , 50 Gigabit Ethernet , PLCA , type field , PSE , P2MP , information exchange , media independent interface , multipoint control protocol , Powered Device , Physical Layer device , forward error correction , 400 Gigabit Ethernet , AUI , Energy-Efficient Ethernet , medium dependent interface , IEEE 802.3 , 5 Gigabit Ethernet , MDI , physical coding sublayer , LAN , Power over Ethernet , 100 Gigabit Ethernet , 25 Gigabit Ethernet , Gigabit Ethernet , single-mode fiber , reconciliation sublayer , 10 Gigabit Ethernet , attachment unit interface ,
  • IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers - Redline 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest ...
    Subject(s) : mechanical requirements , electrical requirements , power transformers , autotransformers , distribution transformers , IEEE C57.12.00™ , regulating transformers ,
  • American National Standard Performance Criteria for Active Interrogation Systems Used for Homeland Security 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: The minimum performance criteria for active interrogation systems in homeland security applications are described in this standard. These systems are intended for non-intrusive inspection of closed containers, vehicles, ...
    Subject(s) : weapons of mass destruction , detection , homeland security , WMD , high-energy x-rays , identification , SNM , chemical warfare agents , neutrons , explosives , special nuclear materials , gamma-rays , baggage , ANSI N42.41 , active interrogation , cargo ,
  • American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security Amendment 1 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: The requirement for 6.6.1, listed in Table 2 (Clause 6) and the test method for 6.6.2 of ANSI N42.32-2016, are no longer applicable. Requirements and test methods in this amendment supersede those in 6.6.1 and 6.6.2. The ...
    Subject(s) : information and guidance , radiation detection , personal radiation detectors , neutrons , alarming personal radiation detectors , over-range response for photons , radiation detection instruments , gamma-rays , ANSI N42.32 , pocket-sized , performance specifications and testing ,
  • ISO/IEC/IEEE International Standard--Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 3: Standard for Ethernet AMENDMENT 11: Physical layers and management parameters for 1 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: This amendment to IEEE Std 802.3-2018 adds Physical Layer specifications and management parameters for 100 Gb/s and 400 Gb/s Ethernet optical interfaces for reaches up to 10 km based on 100 Gb/s per wavelength optical signaling.
    Subject(s) : single-mode fiber (SMF) , 100GBASE-FR1 , IEEE 802.3cu , 400GBASE-LR4-6 , 100GBASE-LR1 , 400 Gb/s Ethernet , Energy-Efficient Ethernet (EEE) , forward error correction (FEC) , IEEE 802.3 , 400GBASE-FR4 , 100 Gb/s Ethernet , Ethernet , Physical Medium Dependent (PMD) sublayer , PAM4 ,
  • ISO/IEC/IEEE International Standard--Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 1CS: Link-local registration protocol 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Protocols, procedures, and managed objects for a Link-local Registration Protocol (LRP) to replicate a registration database from one end to the other of a point-to-point link and to replicate changes to parts of that ...
    Subject(s) : IEEE 802 , MAC Bridges , bridging , Bridged Local Area Networks , IEEE 802.1CS , local area networks (LANs) , LRP , Time-Sensitive Networking , Link-local Registration Protocol , IEEE 802.1Q , bridges , TSN , Virtual Bridged Local Area Networks (virtual LANs) ,
  • IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Guidance for the specification and performance of an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584, is provided in this document. The minimum recommended requirements to enable ...
    Subject(s) : protective device coordination study , arc in enclosures , incident energy , arc-flash hazard marking , arc in open air , arc-flash hazard analysis , bolted fault currents , IEEE 1584.1 , IEEE 1584 , working distances , arc fault currents , electrical hazard , short-circuit study , arc-flash boundary , arc-flash hazard ,
  • IEEE Guide for Assessing, Measuring, and Verifying Volt-Var Control and Optimization on Distribution Systems 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: Electric utilities are seeking to improve the overall efficiency and performance of the distribution system while helping to achieve energy and demand savings. Distribution volt-var optimization (VVO) can play a major role ...
    Subject(s) : volt-var optimization (VVO) , conservation voltage reduction (CVR) , demand reduction , measurement and verification , loss reduction , IEEE 1885 ,
  • 2023 National Electrical Safety Code® (NESC®) 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: The 2023 NESC(R) covers practical safeguarding of persons during the installation, operation, or maintenance of (1) electric supply stations, (2) overhead supply and communications lines, and (3) underground or buried ...
    Subject(s) : communications industry safety; construction of communication lines; construction of electric supply lines; electrical safety; electric supply stations; electric utility stations; high-voltage safety; NESC; National Electrical Safety Code; operation of communications sys­tems; operation of electric supply systems; power station equipment; power station safety; public utility safety; safety work rules; underground communication line safety; underground electric line safety. ,
  • ISO/IEC/IEEE International Standard--Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 3: Standard for Ethernet Amendment 10: Maintenance #14: Isolation 

    Type: Standard
    Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
    Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    Abstract: This amendment to IEEE Std 802.3-2018 replaces references to the IEC 60950 series of standards with appropriate references to the IEC 62368 series and makes appropriate changes to the standard corresponding to the new references.
    Subject(s) : IEC 60950 , isolation , IEEE 802.3 , safety , IEC 62368 , Ethernet , IEEE 802.3cr ,

View more