MIL-A-89400
U. S. AIR TARGET CHART - SERIES 200 (ATC-200)
Year: 1995
Abstract: This general specification defines requirements for the Defense Mapping Agency's (DMA) U. S. Air Target Chart - Series 200 (ATC-200) which supports the radar/intelligence requirements of tactical and strategic air forces.
The purpose of this specification is to assure uniformity of treatment among mapping and charting elements, primarily DMA and its contractors, engaged in a coordinated production and maintenance program for this product. Feature requirements are stated in terms of DMA's Feature/Attribute Coding Standard (FACS), to maintain consistency between various DMA production methods. The use of FACS in this specification is not intended to imply any external digital data coding standard. FACS is the internal coding standard used by DMA's Digital Production System (DPS), which is the primary intended, but not exclusive, method for production of this product at this time. The Digital Geographic Information Exchange Standard (DIGEST) Feature Attribute Coding Catalog (FACC), not FACS, is the approved coding standard for the exchange of digital geographic data, as well as the standard for DMA's Vector Product Format (VPF) product line. FACC may be included in, or replace FACS in a future edition of this specification.
This specification is UNCLASSIFIED.
The security classification of the products generated by the use of these specifications will be the lowest category practicable. When it is necessary to assign a security classification to the product, it shall be in accordance with established national security procedures. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Director, Defense Mapping Agency, ATTN: PR, ST A-13, 8613 Lee Highway, Fairfax, VA 22031-2137 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: The charts produced under these specifications will be used primarily in the planning, briefing, training and execution of bombing operations. The Air Target Chart (ATC-200) will support tactics and weapons systems for bombing operations conducted at high and low altitudes under visual and radar operations.
The purpose of this specification is to assure uniformity of treatment among mapping and charting elements, primarily DMA and its contractors, engaged in a coordinated production and maintenance program for this product. Feature requirements are stated in terms of DMA's Feature/Attribute Coding Standard (FACS), to maintain consistency between various DMA production methods. The use of FACS in this specification is not intended to imply any external digital data coding standard. FACS is the internal coding standard used by DMA's Digital Production System (DPS), which is the primary intended, but not exclusive, method for production of this product at this time. The Digital Geographic Information Exchange Standard (DIGEST) Feature Attribute Coding Catalog (FACC), not FACS, is the approved coding standard for the exchange of digital geographic data, as well as the standard for DMA's Vector Product Format (VPF) product line. FACC may be included in, or replace FACS in a future edition of this specification.
This specification is UNCLASSIFIED.
The security classification of the products generated by the use of these specifications will be the lowest category practicable. When it is necessary to assign a security classification to the product, it shall be in accordance with established national security procedures. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Director, Defense Mapping Agency, ATTN: PR, ST A-13, 8613 Lee Highway, Fairfax, VA 22031-2137 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: The charts produced under these specifications will be used primarily in the planning, briefing, training and execution of bombing operations. The Air Target Chart (ATC-200) will support tactics and weapons systems for bombing operations conducted at high and low altitudes under visual and radar operations.
Subject: Air Target Chart - Series 200
Show full item record
contributor author | DOD - MP - The National Geospatial-Intelligence Agency, (DepSO) | |
date accessioned | 2017-09-04T16:48:08Z | |
date available | 2017-09-04T16:48:08Z | |
date copyright | 01/31/1995 | |
date issued | 1995 | |
identifier other | WHJZDAAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/111590 | |
description abstract | This general specification defines requirements for the Defense Mapping Agency's (DMA) U. S. Air Target Chart - Series 200 (ATC-200) which supports the radar/intelligence requirements of tactical and strategic air forces. The purpose of this specification is to assure uniformity of treatment among mapping and charting elements, primarily DMA and its contractors, engaged in a coordinated production and maintenance program for this product. Feature requirements are stated in terms of DMA's Feature/Attribute Coding Standard (FACS), to maintain consistency between various DMA production methods. The use of FACS in this specification is not intended to imply any external digital data coding standard. FACS is the internal coding standard used by DMA's Digital Production System (DPS), which is the primary intended, but not exclusive, method for production of this product at this time. The Digital Geographic Information Exchange Standard (DIGEST) Feature Attribute Coding Catalog (FACC), not FACS, is the approved coding standard for the exchange of digital geographic data, as well as the standard for DMA's Vector Product Format (VPF) product line. FACC may be included in, or replace FACS in a future edition of this specification. This specification is UNCLASSIFIED. The security classification of the products generated by the use of these specifications will be the lowest category practicable. When it is necessary to assign a security classification to the product, it shall be in accordance with established national security procedures. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Director, Defense Mapping Agency, ATTN: PR, ST A-13, 8613 Lee Highway, Fairfax, VA 22031-2137 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: The charts produced under these specifications will be used primarily in the planning, briefing, training and execution of bombing operations. The Air Target Chart (ATC-200) will support tactics and weapons systems for bombing operations conducted at high and low altitudes under visual and radar operations. | |
language | English | |
title | MIL-A-89400 | num |
title | U. S. AIR TARGET CHART - SERIES 200 (ATC-200) | en |
type | standard | |
page | 138 | |
status | Active | |
tree | DOD - MP - The National Geospatial-Intelligence Agency, (DepSO):;1995 | |
contenttype | fulltext | |
subject keywords | Air Target Chart - Series 200 | |
subject keywords | ATC-200 | |
subject keywords | Charting | |
subject keywords | Defense Mapping Agency | |
subject keywords | MC&G (Mapping | |
subject keywords | Charting and Geodesy) |