Recent Submissions

  • ANS 2.23 

    Type: standard
    Source: ANS - American Nuclear Society:;2016
    Organization : ANS - American Nuclear Society
    Abstract: Scope: This standard1) is a major update of ANSI/ANS-2.23-2002 (R2009) [1]2). It describes actions that the owner of a nuclear power plant shall take to prepare for and respond to a felt earthquake at the plant(s), including ...
  • ANS 2.2 

    Type: standard
    Source: ANS - American Nuclear Society:;2016
    Organization : ANS - American Nuclear Society
    Abstract: Scope: This standard specifies the required earthquake instrumentation at the site and on Seismic Category I structures of light-water-cooled, land-based nuclear power plants. It may be used for guidance at other types of ...
  • ANS 18.1 

    Type: standard
    Source: ANS - American Nuclear Society:;2016
    Organization : ANS - American Nuclear Society
    Abstract: Scope: This standard provides a set of typical radionuclide concentrations for estimating the radioactivity in the principal fluid systems of light water reactors and for projecting the expected releases of radioactivity ...
  • ANS 15.11 

    Type: standard
    Source: ANS - American Nuclear Society:;2016
    Organization : ANS - American Nuclear Society
    Abstract: Scope: This standard establishes the elements of a radiation protection program and the criteria necessary to provide an acceptable level of radiation protection for personnel at research reactor facilities and the public ...
  • ANS 15.4 

    Type: standard
    Source: ANS - American Nuclear Society:;2016
    Organization : ANS - American Nuclear Society
    Abstract: Scope: This standard provides criteria for the selection and training of research reactor operating personnel. It addresses their qualifications, training, initial licensing, requalification, and relicensing. This standard ...
  • ANS 19.11 

    Type: standard
    Source: ANS - American Nuclear Society:;2017
    Organization : ANS - American Nuclear Society
    Abstract: Scope: This standard 1) provides guidance and specifies criteria for determining the MTC in PWRs. Measurement of the isothermal temperature coefficient of reactivity (ITC) at hot-zero-power (HZP) conditions is covered in ...
  • ANS 2.17 

    Type: standard
    Source: ANS - American Nuclear Society:;2010
    Organization : ANS - American Nuclear Society
    Abstract: This national standard establishes the requirements for evaluating the occurrence and movement of radionuclides in the subsurface resulting from abnormal radionuclide releases at commercial nuclear power plants.
    This ...
  • ANS 8.1 ERTA 

    Type: standard
    Source: ANS - American Nuclear Society:;
    Organization : ANS - American Nuclear Society
  • ANS 8.26 

    Type: standard
    Source: ANS - American Nuclear Society:;2012
    Organization : ANS - American Nuclear Society
    Abstract: This standard presents the fundamental content elements of a training and qualification program for individuals with responsibilities for performing the various technical aspects of criticality safety engineering. The ...
  • ANS 8.1 

    Type: standard
    Source: ANS - American Nuclear Society:;2007
    Organization : ANS - American Nuclear Society
    Abstract: This standard is applicable to operations with fissionable materials outside nuclear reactors, except for the assembly of these materials under controlled conditions, such as in critical experiments. Generalized basic ...
  • ANS 19.11 

    Type: standard
    Source: ANS - American Nuclear Society:;2011
    Organization : ANS - American Nuclear Society
    Abstract: This standard provides guidance and specifies criteria for determining the MTC in water moderated power reactors. Measurement of the isothermal temperature coefficient of reactivity (ITC) at hot zero power (HZP) conditions ...
  • ANS 2.10 

    Type: standard
    Source: ANS - American Nuclear Society:;2003
    Organization : ANS - American Nuclear Society
    Abstract: This standard provides criteria for the timely retrieval and the subsequent processing, handling, and storage of data obtained from seismic instrumentation specified in ANSI/ANS-2.2- 2002 [1].1) Also included ...
  • ANS 15.11 

    Type: standard
    Source: ANS - American Nuclear Society:;2009
    Organization : ANS - American Nuclear Society
    Abstract: This standard establishes the elements of a radiation protection program and the criteria necessary to provide an acceptable level of radiation protection for personnel at research reactor facilities and the public consistent ...
  • ANS 5.1 

    Type: standard
    Source: ANS - American Nuclear Society:;2005
    Organization : ANS - American Nuclear Society
    Abstract: This standard sets forth values for the decay heat power from fission products and 239U and 239Np following shutdown of light water reactors (LWRs) containing 235U, 238U, and plutonium. The decay heat power from fission ...
  • ANS 8.20 

    Type: standard
    Source: ANS - American Nuclear Society:;2005
    Organization : ANS - American Nuclear Society
    Abstract: This standard provides criteria for nuclear criticality safety training for personnel associated with operations outside reactors where a potential exists for criticality accidents. It is not sufficient for the training ...
  • ANS 2.15 

    Type: standard
    Source: ANS - American Nuclear Society:;2013
    Organization : ANS - American Nuclear Society
    Abstract: Introduction and scope
    In the decades prior to this standard, significant enhancements have been made in the area of atmospheric dispersion modeling. Considerable advances have occurred in our understanding ...
  • ANS 55.6 

    Type: standard
    Source: ANS - American Nuclear Society:;2007
    Organization : ANS - American Nuclear Society
    Abstract: This standard sets forth minimum design, construction, and performance, requirements, with due consideration for operation, of the Liquid Radioactive Waste Processing System (LRWPS) for light water reactor (LWR) plants for ...
  • ANS 15.1 

    Type: standard
    Source: ANS - American Nuclear Society:;2013
    Organization : ANS - American Nuclear Society
    Abstract: This standard identifies and establishes the content of technical specifications (TS) for research and test reactors. Areas addressed are definitions, safety limits, limiting safety system settings, limiting conditions for ...
  • ANS 58.9 

    Type: standard
    Source: ANS - American Nuclear Society:;2009
    Organization : ANS - American Nuclear Society
    Abstract: This standard provides criteria for the designer which interpret the requirements of Title 10, Code of Federal Regulations, Part 50, "Licensing of Production and Utilization Facilities," Appendix A. "General Design Criteria ...
  • ANS 3.4 

    Type: standard
    Source: ANS - American Nuclear Society:;2013
    Organization : ANS - American Nuclear Society
    Abstract: This standard defines the physical and mental health requirements for licensing of nuclear power plant reactor operators and senior operators. It also addresses the content, extent, methods of examination, and monitoring ...

View more