ARMY - EA - Edgewood Chemical Biological Center (ECBC)
Browse by
Recent Submissions
-
MIL-M-14329
Abstract: This specification covers a field protective mask for use by personnel manning tanks. -
MIL-DTL-51194D
Abstract: This specification covers one type of particulate filter rated at 20 standard cubic feet per minute airflow. Intended Use: The particulate filter covered by this specification is intended for use in the M13A1 ...Subject(s) : Air purifier , -
MIL-I-10415
Abstract: This specification covers one type of azimuth indicator known as Indicator, Azimuth, T23 for use with Local Control System M16A1 to indicate azimuth deflection. -
MIL-F-10071A
Abstract: This specification covers one type of main armament combat vehicle flame thrower. -
MIL-PRF-32016A
Abstract: This specification covers gas phase adsorber cells used to remove toxic chemical vapors exhausted from laboratory air filtration systems. This specification does not include requirements for the housing into which these ...Subject(s) : Air purifier , CK (Cyanogen chloride) , DMMP (Dimethylmethylphosphonate) , Filtered air , Gas filter , R-134a , (1,1,1,2 Tetrafluoroethane) , -
MIL-STD-1441A
Abstract: This standard covers various types and classes of helium leak detection equipment for use in testing the inert components of chemical munitions for leaks, and also the final closure containing the chemical fill. Intended ...Subject(s) : Helium Leak Detector , Mass Spectrometer , -
MIL-M-10666A
Abstract: This specification covers a lightweight gas mask for use as protection against gas. -
MIL-S-11161
Abstract: This specification covers one grade of sodium dichromate for use as a chemical reagent. -
MIL-DTL-211F (1)
Abstract: This specification covers three classes of red phosphorus.Intended Use: Red phosphorus is intendedfor use inmilitarypyrotechnicmixtures. Use of class 3 and 4 red phosphorus will reduce dust during pyrotechnic ... -
-
MMM-A-182A
Abstract: This specification covers a cold-bonding rubber adhesive for use with natural or synthetic rubber. It is commercially known as rubber cement for cold-patching. Intended Use: The type I adhesive covered by ... -
MIL-DTL-3284F (1)
Abstract: This specification covers two types of Disperse Red 9 dye (CAS 83-38-2), chemically known as 1-methylaminoanthraquinone;
Type I - for solvent based binders and bowl and V type blenders,
Type II - for air based ...Subject(s) : Colored signaling smoke , Smoke grenade , -
MIL-C-12758
Abstract: This specification covers clips of smoke sampling tubes for use in the M11 smoke identification kit. Intended Use: Sampling tubes covered by this specification are intended for use in the sampling and ... -
MS36085 REV B
Abstract: This military standard is approved for use by all Departments and Agencies of the Department of Defense. Selection for all new engineering and design applications and for repetitive use shall be made from this document -
A-A-59310 VALID NOTICE 1
Abstract: This CID covers the requirements for a filter assembly, for use in the fuel systems of internal combustion engines, modified for use as an air filter for air-powered, bleed air, control valves (see 6.1). Intended ... -
MS36265
Abstract: This military standard is approved by the Department of Defense and is mandatory on all activities. Selection for all new engineering and design applications and for repetitive use shall be made from this document. -
MS36576 REV A
Abstract: This military standard is approved for use by all Departments and Agencies of the Department of Defense. Selection for all new engineering and design applications and for repetitive use shall be made from this document.