Search
Now showing items 1-10 of 10
IEC IECEE CEE-7: English -- Specification for plugs and socket-outlets for domestic and similar purpose - Edition 2.0; ***Only used in addition to IEC 60884-1***
Abstract: This specification applies to plugs and socket-outlets and to cable couplers, with and without earthing contact, with a rated voltage not exceeding 380 V and a rated current not exceeding 25 A, intended for domestic ...
IEC 60063: English -- Preferred Number Series for Resistors and Capacitors - Edition 2
Abstract: The figures given in Table I and their decimal multiples of sub-multiples are series of preferred values with their associated values of tolerances for:
a) the resistance of resistors;
b) the capacitance of capacitors....
a) the resistance of resistors;
b) the capacitance of capacitors....
IEC 60151-2: English -- Measurements of the Electrical Properties of Electronic Tubes and Valves Part 2: Measurement of Heater or Filament Current - First Edition
Abstract: This document outlines conditions to be followed when measuring heater or filament current. It does not include measuring methods.
IEC 60141-2: English -- Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 2: Internal Gas- Pressure Cables and Accessories for Alternating Voltages up to 275 kV - First Edition; Amendment 1: 05-1967
Abstract: This recommendation applies to tests on radial-field impregnated-paper-insulated cables and accessories in which, during normal operation, a gas pressure exceeding 12 kg/cm2 gauge is applied internally? i.e. with the gas ...
IEC 60151-3: English -- Measurements of the Electrical Properties of Electronic Tubes and Valves Part 3: Measurement of Equivalent Input and Output Admittances - First Edition
Abstract: This document outlines conditions to be followed when measuring input and output admittances. It does not include measuring methods.
These conditions include :
a) Definitions of the admittances to be measured;
b) Measuring conditions;
c) Details of a standard adaptor and shielding....
These conditions include :
a) Definitions of the admittances to be measured;
b) Measuring conditions;
c) Details of a standard adaptor and shielding....
IEC 60145: English -- Var-Hour (Reactive Energy) Meters - Edition 1
Abstract: The Present recommendations apply only to newly manufactured induction type var-hour meters for the measurement of reactive energy of frequency between 40 and 60 Hz (c/s), of an accuracy class of 3.0 for ordinary usage and ...
IEC 60152: English -- Identification by Hour Numbers of the Phase Conductors of 3-Phase Electric Systems - Edition 1
Abstract: FOREWORD
The formal decisions or agreements of the I.E.C. on technical matters, prepared by Technical Committees on which all the National Committees having a special interest therein are represented, ...
The formal decisions or agreements of the I.E.C. on technical matters, prepared by Technical Committees on which all the National Committees having a special interest therein are represented, ...
IEC 60141-3: English -- Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 3: External Gas- Pressure (Gas Compression) Cables and Accessories for Alternating Voltages up to 275 kV - First Edition; Amendment 1: 05-1967
Abstract: This recommendation applies to tests on radial-field impregnated-paper insulated cables and accessories which, during normal operation, work under a gas pressure exceeding 12 kg/cm2 applied outside a sheath or ...