درباره ما
NFPA 99
Health Care Facilities Code - Effective Date: 9/3/2014
Organization:
NFPA - (NFPA) - National Fluid Power Association
Year: 2015
Abstract: The scope of this code is to establish minimum criteria as follows in 1.1.2 through 1.1.13.
Fundamentals. Chapter 4 establishes criteria for levels of health care services or systems based on risk to the patients, staff, or visitors in health care facilities.
Gas and Vacuum Systems.
Chapter 5 covers the performance, maintenance, installation, and testing of the following:
(1) Nonflammable medical gas systems with operating pressures below a gauge pressure of 2068 kPa (300 psi)
(2) Vacuum systems in health care facilities
(3) Waste anesthetic gas disposal (WAGD) systems, also referred to as scavenging
(4) Manufactured assemblies that are intended for connection to the medical gas, vacuum, or WAGD systems (also referred to as scavenging)
Requirements for portable compressed gas systems are covered in Chapter 11.
Electrical Systems.
Chapter 6 covers the performance, maintenance, and testing of electrical systems (both normal and essential) in health care facilities.
The following areas are not addressed in this code, but are addressed in other NFPA documents:
(1) Specific requirements for wiring and installation of equipment are covered in NFPA 70, National Electrical Code.
(2) Requirements for illumination and identification of means of egress in health care facilities are covered in NFPA 101, Life Safety Code.
(3) Requirements for installation, testing, and maintenance of fire protection signaling systems are covered in NFPA 72, National Fire Alarm and Signaling Code.
(4) Requirements for installation of fire pumps are covered in NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection, except that the alternate source of power are permitted to be the essential electrical system.
(5) Requirements for installation of stationary engines and gas turbines are covered in NFPA37, Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines.
Information Technology and Communications Systems. Chapter 7 covers the performance, maintenance, and testing of information technology and communications systems in health care facilities.
Plumbing. Chapter 8 covers the performance, maintenance, and testing of plumbing systems in health care facilities.
HVAC Systems. Chapter 9 covers the performance, maintenance, and testing of heating, cooling, and ventilating in health care facilities.
Electrical Equipment. Chapter 10 covers the performance, maintenance, and testing of electrical equipment in health care facilities.
Gas Equipment. Chapter 11 covers the performance, maintenance, and testing of gas equipment in health care facilities.
* Emergency Management. Chapter 12 establishes criteria for emergency management in the development of a program for effective disaster preparedness, response, mitigation, and recovery in health care facilities.
Security Management. Chapter 13 establishes criteria for security management, including management controls, mitigation practices, staff training, and program evaluation in health care facilities.
* Hyperbaric Facilities. Chapter 14 covers the recognition of, and protection against, hazards of an electrical, explosive, or implosive nature, as well as fire hazards associated with hyperbaric chambers and associated facilities that are used, or intended to be used, for medical applications and experimental procedures at gauge pressures from 0 kPa to 690 kPa (0 psi to 100 psi).
Features of Fire Protection. Chapter 15 covers the performance, maintenance, and testing of fire protection equipment in health care facilities.
Purpose. The purpose of this code is to provide minimum requirements for the installation, inspection, testing, maintenance, performance, and safe practices for facilities, material, equipment, and appliances, including other hazards associated with the primary hazards.
Fundamentals. Chapter 4 establishes criteria for levels of health care services or systems based on risk to the patients, staff, or visitors in health care facilities.
Gas and Vacuum Systems.
Chapter 5 covers the performance, maintenance, installation, and testing of the following:
(1) Nonflammable medical gas systems with operating pressures below a gauge pressure of 2068 kPa (300 psi)
(2) Vacuum systems in health care facilities
(3) Waste anesthetic gas disposal (WAGD) systems, also referred to as scavenging
(4) Manufactured assemblies that are intended for connection to the medical gas, vacuum, or WAGD systems (also referred to as scavenging)
Requirements for portable compressed gas systems are covered in Chapter 11.
Electrical Systems.
Chapter 6 covers the performance, maintenance, and testing of electrical systems (both normal and essential) in health care facilities.
The following areas are not addressed in this code, but are addressed in other NFPA documents:
(1) Specific requirements for wiring and installation of equipment are covered in NFPA 70, National Electrical Code.
(2) Requirements for illumination and identification of means of egress in health care facilities are covered in NFPA 101, Life Safety Code.
(3) Requirements for installation, testing, and maintenance of fire protection signaling systems are covered in NFPA 72, National Fire Alarm and Signaling Code.
(4) Requirements for installation of fire pumps are covered in NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection, except that the alternate source of power are permitted to be the essential electrical system.
(5) Requirements for installation of stationary engines and gas turbines are covered in NFPA37, Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines.
Information Technology and Communications Systems. Chapter 7 covers the performance, maintenance, and testing of information technology and communications systems in health care facilities.
Plumbing. Chapter 8 covers the performance, maintenance, and testing of plumbing systems in health care facilities.
HVAC Systems. Chapter 9 covers the performance, maintenance, and testing of heating, cooling, and ventilating in health care facilities.
Electrical Equipment. Chapter 10 covers the performance, maintenance, and testing of electrical equipment in health care facilities.
Gas Equipment. Chapter 11 covers the performance, maintenance, and testing of gas equipment in health care facilities.
* Emergency Management. Chapter 12 establishes criteria for emergency management in the development of a program for effective disaster preparedness, response, mitigation, and recovery in health care facilities.
Security Management. Chapter 13 establishes criteria for security management, including management controls, mitigation practices, staff training, and program evaluation in health care facilities.
* Hyperbaric Facilities. Chapter 14 covers the recognition of, and protection against, hazards of an electrical, explosive, or implosive nature, as well as fire hazards associated with hyperbaric chambers and associated facilities that are used, or intended to be used, for medical applications and experimental procedures at gauge pressures from 0 kPa to 690 kPa (0 psi to 100 psi).
Features of Fire Protection. Chapter 15 covers the performance, maintenance, and testing of fire protection equipment in health care facilities.
Purpose. The purpose of this code is to provide minimum requirements for the installation, inspection, testing, maintenance, performance, and safe practices for facilities, material, equipment, and appliances, including other hazards associated with the primary hazards.
Collections
:
Show full item record
| contributor author | NFPA - (NFPA) - National Fluid Power Association | |
| date accessioned | 2017-09-04T17:08:49Z | |
| date available | 2017-09-04T17:08:49Z | |
| date copyright | 2015.01.01 | |
| date issued | 2015 | |
| identifier other | YLGMIFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessioutho927962809332AC4/handle/yse/132278 | |
| description abstract | The scope of this code is to establish minimum criteria as follows in 1.1.2 through 1.1.13. Fundamentals. Chapter 4 establishes criteria for levels of health care services or systems based on risk to the patients, staff, or visitors in health care facilities. Gas and Vacuum Systems. Chapter 5 covers the performance, maintenance, installation, and testing of the following: (1) Nonflammable medical gas systems with operating pressures below a gauge pressure of 2068 kPa (300 psi) (2) Vacuum systems in health care facilities (3) Waste anesthetic gas disposal (WAGD) systems, also referred to as scavenging (4) Manufactured assemblies that are intended for connection to the medical gas, vacuum, or WAGD systems (also referred to as scavenging) Requirements for portable compressed gas systems are covered in Chapter 11. Electrical Systems. Chapter 6 covers the performance, maintenance, and testing of electrical systems (both normal and essential) in health care facilities. The following areas are not addressed in this code, but are addressed in other NFPA documents: (1) Specific requirements for wiring and installation of equipment are covered in NFPA 70, National Electrical Code. (2) Requirements for illumination and identification of means of egress in health care facilities are covered in NFPA 101, Life Safety Code. (3) Requirements for installation, testing, and maintenance of fire protection signaling systems are covered in NFPA 72, National Fire Alarm and Signaling Code. (4) Requirements for installation of fire pumps are covered in NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection, except that the alternate source of power are permitted to be the essential electrical system. (5) Requirements for installation of stationary engines and gas turbines are covered in NFPA37, Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines. Information Technology and Communications Systems. Chapter 7 covers the performance, maintenance, and testing of information technology and communications systems in health care facilities. Plumbing. Chapter 8 covers the performance, maintenance, and testing of plumbing systems in health care facilities. HVAC Systems. Chapter 9 covers the performance, maintenance, and testing of heating, cooling, and ventilating in health care facilities. Electrical Equipment. Chapter 10 covers the performance, maintenance, and testing of electrical equipment in health care facilities. Gas Equipment. Chapter 11 covers the performance, maintenance, and testing of gas equipment in health care facilities. * Emergency Management. Chapter 12 establishes criteria for emergency management in the development of a program for effective disaster preparedness, response, mitigation, and recovery in health care facilities. Security Management. Chapter 13 establishes criteria for security management, including management controls, mitigation practices, staff training, and program evaluation in health care facilities. * Hyperbaric Facilities. Chapter 14 covers the recognition of, and protection against, hazards of an electrical, explosive, or implosive nature, as well as fire hazards associated with hyperbaric chambers and associated facilities that are used, or intended to be used, for medical applications and experimental procedures at gauge pressures from 0 kPa to 690 kPa (0 psi to 100 psi). Features of Fire Protection. Chapter 15 covers the performance, maintenance, and testing of fire protection equipment in health care facilities. Purpose. The purpose of this code is to provide minimum requirements for the installation, inspection, testing, maintenance, performance, and safe practices for facilities, material, equipment, and appliances, including other hazards associated with the primary hazards. | |
| language | English | |
| title | NFPA 99 | num |
| title | Health Care Facilities Code - Effective Date: 9/3/2014 | en |
| type | standard | |
| page | 215 | |
| status | Active | |
| tree | NFPA - (NFPA) - National Fluid Power Association:;2015 | |
| contenttype | fulltext |