SSC - Stennis Space Center
Browse by
Recent Submissions
-
SSTD-8070-0094-COMPNTS
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) establishes the requirements for bourdon tube type pressure and vacuum gauges that are to be used in facility piping and tubing systems. ... -
SSTD-8070-0009-CONFIG REV C-1
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) Standard (SSTD) establishes the requirements and procedures for completion and submittal of Certificate of Completion (COC), Form SSC-625, which is ... -
SSTD-8070-0003-CONFIG
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) covers the instructions to be followed for content and form of technical specifications to be prepared for the procurement of materials ... -
SSTD-8070-0119-MISC REV A
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) Standard (SSTD) establishes the requirements and responsibilities for all excavations as defined in Section 5.1.1, specifically as they relate to processing ... -
SSTD-8070-0083-ELEC
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) is a general guide for the design of 13.8KV electric power distribution facilities at SSC.
APPLICABILITY
a. The ... -
SSTD-8070-0015-WELD
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) Standard (SSTD) provides for a qualified American Society of Mechanical Engineers (ASME) weld procedure of Gas Tungsten Arc Welding (GTAW) of carbon steel ... -
SSTD-8070-0113-IDCODES
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) provides a uniform method of assigning identification (ID) numbers to all newly installed oral warning microphones, speakers and stations ... -
SSTD-8070-0002-CONFIG REV B-2
Abstract: Purpose
This Stennis Space Center Standard (SSTD) establishes requirements for creating and maintaining drawings and related technical documentation produced and maintained by means of computer aided ... -
SSTD-8070-0013-WELD
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) sets forth the criteria for each class of inspection required for welding at SSC.
APPLICABILITY
This SSTD applies ... -
SSTD-8070-0001-CONFIG REV D
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) Standard (SSTD) establishes the responsibilities, requirements and practices for facility engineering documentation related to the as-built configuration ... -
SSTD-8070-0096-TEST
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) defines acceptance requirements and test procedures for testing low voltage instrumentation transmission, distribution and control cable ... -
SSTD-8070-0007-CONFIG REV C
Abstract: PURPOSE
The National Aeronautics and Space Administration (NASA) will comply with applicable requirements, specifications and/or policy documents. In circumstances where a particular requirement or ... -
SSTD-8070-0093-COMPNTS
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) defines the three (3) classifications of pressure transducers used at SSC and the major error contributing factors. Standard classification ... -
SSTD-8070-0020-WELD
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) Standard (SSTD) provides for a qualified American Society of Mechanical Engineers (ASME) weld procedure for Gas Tungsten Arc Welding (GTAW) of P-8 Stainless ... -
SSTD-8070-0010-CONFIG REV C
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) details the procedures for maintaining the SSC System Operation and Maintenance Responsibility Database (SOMRD), as required by Stennis ... -
SSTD-8070-0017-WELD REV A
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) Standard (SSTD) provides for a qualified American Society of Mechanical Engineers (ASME) weld procedure for Gas Tungsten Arc Welding (GTAW) of austenitic ... -
SSTD-8070-0125-WELD REV A
Abstract: PURPOSE
This John C. Stennis Standard (SSTD) specifies the procedure for Gas Tungsten Arc Welding (GTAW) of seamless copper tube P No. 31 at John C. Stennis Space Center (SSC).
APPLICABIL ... -
SSTD-8070-0008-CONFIG REV A
Abstract: PURPOSE
This John C. Stennis Space Center (SSC) standard (SSTD) specifies the requirements for documentation and disposition of nonconforming products under control of the SSC Facility Operating Services ... -
SSTD-8070-0004-CONFIG
Abstract: Purpose
Developed by the National Aeronautics and Space Administration (NASA), SpecsIntact was designed for use by engineers, architects, specification writers, project managers, and construction ... -
SSTD-8070-0112-IDCODES REV B
Abstract: PURPOSE
This standard (STD) establishes the numbering system and the procedure for assigning line designator numbers to Stennis Space Center (SSC) facilities (real property) piping systems drawings in ...