Search
Now showing items 21-30 of 76
ABMA 12240-1: Spherical Plain Bearings - Part 1: Radial Spherical Plain Bearings - Stabilized Maintenance 2010
Abstract: This part of IS0 12240 specifies dimension series, tolerances and radiai internal clearances for radial spherical plain bearings.
The dimensions and tolerances specified in this part of IS0 12240 have been selected to ...
The dimensions and tolerances specified in this part of IS0 12240 have been selected to ...
ABMA 14190: Aerospace - Airframe Rolling Bearings: Ball and Spherical Roller Bearings - Technical Specification - Stabilized Maintenance 2010
Abstract: This Intemational Standard specifies the required characteristics, inspections and tests, quality assurance and conditions for qualification, permissible static loads, acceptance and delivery conditions for rigid and ...
ABMA 15: Ball Bearings With Spherical Outside Surfaces And Extended Inner Ring Width (Includes Eccentric Locking Collars) - Includes Errata: 1991; Stabilized Maintenance 2010
Abstract: This Standard specifies boundary dimensions and tolerances for bearings with spherical outside surfaces and extended inner ring width and eccentric locking collars. These bearings are frequently mounted in housings having ...
ABMA B3.2: Rolling Element Bearings – Aircraft Engine, Engine Gearbox, and Accessory Applications – Surface Visual Inspection - Stabilized Maintenance 2010
Abstract: This standard establishes a system for uniform visual acceptance criteria for aircraft engine, gearbox and accessory anti-friction bearings in continuous rotation applications made of the material listed in table 1.The ...
ABMA 18.2: Needle Roller Bearings Radial, Inch Design
Abstract: This standard for Inch Design Industrial Radial Needle Roller Bearings and components includes:
Identification Code
Boundary Dimensions
Bearing Tolerances
Fitting and Mounting Practice
Airframe ...
Identification Code
Boundary Dimensions
Bearing Tolerances
Fitting and Mounting Practice
Airframe ...
ABMA 14: Housing For Bearings With Spherical Outside Surfaces - Stabilized Maintenance 2010
Abstract: This standard specifies boundary dimensions and tolerances for ball bearings with spherical outside surfaces and extended inner ring width. The feature of mating housing and bearing spherical surfaces is intended to provide initial self-alignment at mounting. Included are pillow block, flanged and take-up unit housings.
The housings in this sta...
The housings in this sta...