AIA/NAS NASM25027

NUT, SELF-LOCKING, 250 °F, 450 °F, AND 800 °F - Rev 1

contributor author	AIA/NAS - Aerospace Industries Association of America Inc.
date accessioned	2017-09-04T17:42:14Z
date available	2017-09-04T17:42:14Z
date copyright	41264
date issued	2012
identifier other	EACHBFAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/165250
description abstract	This specification covers self-locking nuts for use in temperatures of 250 °F, 450 °F, and 800 °F (see 6.1).Intended Use: The nuts conforming to this specification are intended for use in applications where the temperature is not greater than the following values: Copper-base alloy nuts – 250 °F Aluminum-alloy nuts – 250 °F Corrosion-resistant steel – 250 °F, 450 °F, or 800 °F Noncorrosion-resistant steel – 250 °F or 450 °F Nickel-copper alloy nuts – 250 °F NOTE: Temperature limits below those listed may occur due to coatings, lubricants and/or non-metallic locking elements. Certain limitations in reusability (less than 15 cycles) occur for certain material and lubricant combinations.
language	English
title	AIA/NAS NASM25027	num
title	NUT, SELF-LOCKING, 250 °F, 450 °F, AND 800 °F - Rev 1	en
type	standard
page	26
status	Active
tree	AIA/NAS - Aerospace Industries Association of America Inc.:;2012
contenttype	fulltext