Now showing items 1-20 of 5597

      • CSA A112.18.6-09/CSA-B125.6-09 

        Type: standard
        Source: CSA - CSA Group:;2009
        Organization : CSA - CSA Group
        Abstract: This Standard covers flexible water connectors for use in water supply systems under
        (a) continuous pressure in accessible locations; and
        (b) intermittent pressure in recreational vehicles only.
        In this Standard, ...
      • CSA A112.18.6-09/CSA-B125.6-09 

        Type: standard
        Source: CSA - CSA Group:;2014
        Organization : CSA - CSA Group
      • CSA A123.1-05/A123.5-05 

        Type: standard
        Source: CSA - CSA Group:;2015
        Organization : CSA - CSA Group
      • CSA A123.1-05/A123.5-05 

        Type: standard
        Source: CSA - CSA Group:;2015
        Organization : CSA - CSA Group
        Abstract: This Standard covers asphalt roofing shingles composed of saturated organic felt or impregnated glass felt, coated on both sides with asphaltic material and surfaced on the weather side with mineral granules. This Standard ...
      • CSA A123.1-05/A123.5-05 

        Type: standard
        Source: CSA - CSA Group:;2010
        Organization : CSA - CSA Group
        Abstract: This Standard covers asphalt roofing shingles composed of saturated organic felt or impregnated glass felt, coated on both sides with asphaltic material and surfaced on the weather side with mineral granules. This Standard ...
      • CSA A123.1-05/A123.5-05 

        Type: standard
        Source: CSA - CSA Group:;2010
        Organization : CSA - CSA Group
      • CSA A123.16-04 

        Type: standard
        Source: CSA - CSA Group:;2009
        Organization : CSA - CSA Group
      • CSA A123.16-04 

        Type: standard
        Source: CSA - CSA Group:;2009
        Organization : CSA - CSA Group
        Abstract: This Standard covers three types of asphalt-coated glass-base sheets (asphalt-impregnated and -coated glass-roll roofing) surfaced with insoluble inorganic mineral matter:
        (a) Type I: a lightweight base sheet intended ...
      • CSA A123.17-05 

        Type: standard
        Source: CSA - CSA Group:;2014
        Organization : CSA - CSA Group
      • CSA A123.17-05 

        Type: standard
        Source: CSA - CSA Group:;2009
        Organization : CSA - CSA Group
        Abstract: [Replace this Clause with the following]
        This specification covers glass felts impregnated to varying degrees with asphalt intended to be used with roofing asphalts conforming to the requirements of CSA A123.4. ...
      • CSA A123.2-03 

        Type: standard
        Source: CSA - CSA Group:;2008
        Organization : CSA - CSA Group
      • CSA A123.2-03 

        Type: standard
        Source: CSA - CSA Group:;2008
        Organization : CSA - CSA Group
        Abstract: This Standard deals with asphalt-coated roofing sheets composed of asphalt-saturated organic felt coated on one or both sides with asphalt. Depending on their intended use, these sheets can have a coarse or a fine mineral ...
      • CSA A123.21-10 

        Type: standard
        Source: CSA - CSA Group:;2010
        Organization : CSA - CSA Group
        Abstract: This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles.
        The test methods are
        (a) Method 1: mechanically attached membrane-roofing systems; and ...
      • CSA A123.21-10 

        Type: standard
        Source: CSA - CSA Group:;2010
        Organization : CSA - CSA Group
      • CSA A123.22-08 

        Type: standard
        Source: CSA - CSA Group:;2013
        Organization : CSA - CSA Group
        Abstract: [Add the following note]
        Note 1A: This Standard applies to membranes that can be internally or surface reinforced to provide mechanical strength.
        [Replace this Clause with the ...
      • CSA A123.23-15 

        Type: standard
        Source: CSA - CSA Group:;2015
        Organization : CSA - CSA Group
      • CSA A123.23-15 

        Type: standard
        Source: CSA - CSA Group:;2015
        Organization : CSA - CSA Group
        Abstract: General
        This Standard covers polymer-modified (styrene-butadiene-styrene block copolymer and atactic polypropylene) bitumen sheets intended for use as the plane of watertightness in roofing (including ...
      • CSA A123.24-15 

        Type: standard
        Source: CSA - CSA Group:;2015
        Organization : CSA - CSA Group
        Abstract: The test method in this Standard determines the wind resistance of modular vegetated roof assembly when subjected to dynamic wind flow and loading cycles in laboratory conditions.
        Testing in accordance with the test ...
      • CSA A123.24-15 

        Type: standard
        Source: CSA - CSA Group:;2015
        Organization : CSA - CSA Group
      • CSA A123.3-05 

        Type: standard
        Source: CSA - CSA Group:;2015
        Organization : CSA - CSA Group
        Abstract: This Standard covers asphalt saturated organic roofing felt, with perforations, to be used with roofing asphalts conforming to CSA A123.4 in the construction of built-up roofing membranes, without perforations, applied as ...