Recent Submissions

  • ASSE A1264.1 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2007
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard sets forth safety requirements in industrial and workplace situations for protecting persons in areas/places where danger exists of persons or objects falling through floor, roof or wall openings, or from ...
  • ASSE A10.5 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2006
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard applies to material hoists used to raise or lower materials during construction, alteration or demolition. It is not applicable to the temporary use of permanently installed personnel elevators as material ...
  • ASSE A10.32 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2012
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard establishes performance criteria for personal fall protection equipment and systems in construction and demolition and provides guidelines, recommendations for their use and inspection. It includes, but is ...
  • ASSE Z88.10 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2010
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard provides guidance on how to conduct fit testing of tight-fitting respirators and appropriate methods to be used. Fit testing is only one element of a complete respiratory protection program. Examples of ...
  • ASSE A10.1 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2011
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard establishes the elements and activities for pre-project and pre-task safety and health planning in construction.
    Purpose. The primary purpose of this standard is to assist construction ...
  • ASSE A10.28 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2011
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard applies to platforms suspended from the load lines of cranes or derricks in order to (1) perform work at elevations that cannot normally be reached by other types of scaffolds or aerial work platforms or (2) ...
  • ASSE A10.16 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2009
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard establishes safety requirements pertaining to the construction of tunnels, shafts, and caissons. The requirements set forth in this standard cover environmental control; related facilities; fire prevention; ...
  • ASSE Z244.1 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2008
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard establishes requirements for the control of hazardous energy associated with machines, equipment, or processes that could cause injury to personnel.
  • ASSE Z9.5 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2012
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: Scope and Application
    This standard applies to the ventilation in most laboratories and is written for all laboratory ventilation stakeholders. An emphasis is placed on those with legal responsibilities ...
  • ASSE Z88.7 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2010
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: The requirements of this standard apply to the identification of air-purifying respirator canisters, cartridges and filters used to provide respiratory protection against gases, vapors or particles. These requirements apply ...
  • ASSE Z390.1 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2010
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard sets forth accepted practices for hydrogen sulfide (H2S) safety training and instruction of affected personnel to include, but not be limited to, the following:
    • minimum informational ...
  • ASSE Z359.6 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2009
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard is intended for engineers with expertise in designing fall protection systems. It specifies requirements for the design and performance of complete active fall protection systems, including travel restraint ...
  • ASSE Z490.1 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2009
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard establishes criteria for safety, health, and environmental training programs, including development, delivery, evaluation and program management.
    Purpose. The purpose of this standard is ...
  • ASSE Z590.2 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2003
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard establishes the scope and functions of the professional safety position.
    Purpose: The purpose of this standard is to define the scope and functions of the professional safety position.
  • ASSE A10.15 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2011
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard applies to construction dredging operations.
    Purpose. This standard contains performance requirements in the safe and healthful process of conducting dredging operations:
    1. For the ...
  • ASSE A10.47 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2009
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard covers workers engaged in construction, utility work, maintenance, or repair activities on any area of a highway.
    Purpose. Establishes the minimum requirements for the construction and ...
  • ASSE A10.16 COMPARISON 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2010
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard establishes safety requirements pertaining to the construction of tunnels, shafts, and caissons. The requirements set forth in this standard cover environmental control; related facilities; fi re prevention; ...
  • ASSE A10.10 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2004
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard provides minimum safety requirements for the selection, installation, operation and maintenance of space heating devices and equipment of temporary and portable design. It covers the heater unit and its ...
  • ASSE Z117.1 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2009
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: This standard provides minimum safety requirements to be followed while entering, exiting and working in confined spaces at normal atmospheric pressure.
    Purpose. The purpose of this standard is to ...
  • ASSE Z9.11 

    Type: standard
    Source: ASSE - ASSE/SAFE - American Society of Safety Engineers:;2008
    Organization : ASSE - ASSE/SAFE - American Society of Safety Engineers
    Abstract: Hazardous materials identified or generated from the facility decommissioning process are subject to intense regulation and present huge potential liabilities. The need to improve characterization and management of these ...

View more