Now showing items 1-20 of 1083

      • ASME PTC 5 

        Type: standard
        Source: ASME - ASME International:;1949
        Organization : ASME - ASME International
        Abstract: The purpose of a test on a reciprocating steam engines is to verify the guarantees given by the manufacturer of the engine or to determine the performance of a given engine with regard to one or more of the following ...
      • ASME PTC 19.6 

        Type: standard
        Source: ASME - ASME International:;1955
        Organization : ASME - ASME International
      • ASME PTC 19.12 

        Type: standard
        Source: ASME - ASME International:;1958
        Organization : ASME - ASME International
      • ASME PTC 19.14 

        Type: standard
        Source: ASME - ASME International:;1958
        Organization : ASME - ASME International
        Abstract: Scope:
        THE scope of the work of Committee No. 19 on Instruments and Apparatus is to describe the types of instruments and methods of measurement likely to be required by the ASME ...
      • ASME PTC 19.13 

        Type: standard
        Source: ASME - ASME International:;1961
        Organization : ASME - ASME International
      • ASME PTC 26 

        Type: standard
        Source: ASME - ASME International:;1962
        Organization : ASME - ASME International
        Abstract: OBJECT AND SCOPE
        The purpose of this code is to establish rules and procedures for the conduct of tests to determine the following speed-governing characteristics of internal combustion engine-generator units. ...
      • ASME PTC 19.5.1 

        Type: standard
        Source: ASME - ASME International:;1964
        Organization : ASME - ASME International
      • ASME PTC 19.17 

        Type: standard
        Source: ASME - ASME International:;1965
        Organization : ASME - ASME International
      • ASME PTC 19.16 

        Type: standard
        Source: ASME - ASME International:;1965
        Organization : ASME - ASME International
      • ASME PTC 7 

        Type: standard
        Source: ASME - ASME International:;1969
        Organization : ASME - ASME International
      • ASME PTC 7.1 

        Type: standard
        Source: ASME - ASME International:;1969
        Organization : ASME - ASME International
        Abstract: OBJECT AND SCOPE
        This code provides standard directions for conducting and reporting tests on displacement pumps.
        The object of the code is to establish rules for conducting tests on pumps to determine, under ...
      • ASME PTC 19.10 

        Type: standard
        Source: ASME - ASME International:;1981
        Organization : ASME - ASME International
        Abstract: Presented are descriptions of methods, apparatus, and calculations which are used in conjunction with Performance Test Codes to determine quantitatively, the gaseous constituents of exhausts resulting from stationary ...
      • ASME PTC 24 

        Type: standard
        Source: ASME - ASME International:;1982
        Organization : ASME - ASME International
        Abstract: OBJECT AND SCOPE
        This Code provides standard directions and rules for the conducting and reporting of tests on single or multi-stage ejector units.
        The primary object of the test measurements described ...
      • ASME SI-1 

        Type: standard
        Source: ASME - ASME International:;1982
        Organization : ASME - ASME International
        Abstract: The 1967 Regional Administrative Conference passed the following resolution: "Form a working committee to propose and implement constructive solutions to problems associated with conversion to the metric system."
      • ASME B94.53 

        Type: standard
        Source: ASME - ASME International:;1984
        Organization : ASME - ASME International
        Abstract: This document specifies dimensions and tolerances in inches and millimeters for solid steel metal cutting squaring shear knives used for shearing ferrous and non-ferrous metals. The dimensions and tolerances together with ...
      • ASME PTC 6.1 

        Type: standard
        Source: ASME - ASME International:;1984
        Organization : ASME - ASME International
        Abstract: The object of this Interim Code is to provide a lower cost, less complex procedure for conducting acceptance tests. This is accomplished by reducing both the total number of required measurements and the number of precision ...
      • ASME PTC 19.8 

        Type: standard
        Source: ASME - ASME International:;1985
        Organization : ASME - ASME International
        Abstract: Scope:
        This Supplement of the Performance Test Codes treats the direct measurement of indicated power of piston engines and compressors by use of the engine indicator.
      • ASME PTC 19.23 

        Type: standard
        Source: ASME - ASME International:;1985
        Organization : ASME - ASME International
        Abstract: To prepare a compendium of techniques and methods for model testing. This general procedure is to serve as a guide for the design and application of models by those concerned with the extension or supplementation of ...
      • ASME B94.37M 

        Type: standard
        Source: ASME - ASME International:;1985
        Organization : ASME - ASME International
        Abstract: This Standard covers the dimensional envelope for various styles of single-point roller-turner tools covering brazed, solid, or indexable insert types.
        The numbers shown are designated brazed tools, but the ...
      • ASME PTC 28 

        Type: standard
        Source: ASME - ASME International:;1985
        Organization : ASME - ASME International
        Abstract: OBJECT AND SCOPE
        The object of the test shall be to determine various physical and chemical properties of dust. This Code provides procedures for determining these properties and defines the terminology to be used ...