MIL-DTL-28840C (1)
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH DENSITY, HIGH SHOCK, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR
Organization:
DLA - CC - DLA Land and Maritime
Year: 2010
Abstract: This specification covers circular electrical connectors with removable crimp front release contacts. These connectors are for use with jacketed cable in shipboard applications.Intended Use: The various classes and types of connectors are intended for application as follows: a. MIL-DTL-28840/10 - are receptacles intended for wall or bulkhead flange mounting and for use with conduit backshells, or cable clamps. b. MIL-DTL-28840/11 - are receptacles intended for use at the end of a cable where mounting provisions are not required. c. MIL-DTL-28840/12 - are receptacles intended for mounting on shielding boxes and equipment eases. They have no fittings and are for use with open wiring. Individual wires should not exceed 12 inches in length. Box mount connectors will be used only in controlled atmosphere applications where environmental sealing is not required. d. MIL-DTL-28840/14 - are receptacles intended for wall or bulkhead jam nut mounting and for use with conduit or a cable clamp. e. MIL-DTL-28840/16 - are plugs intended for use at the end of a cable to be mated with a receptacle. f. MIL-DTL-28840/18 - are 90° plugs intended for use at the end of a cable where space does not permit the use of a straight plug. g. Connectors are intended for use with jacketed cable where the connectors will be subjected to high-impact shock conditions beyond the capabilities of the other class connectors. These connectors have crimp contacts which are removed from the front of the connector and a wire sealing range capable of sealing on Naval shipboard cable. These connectors also have a specified shell conductivity. h. These connectors are intended for use where the connector will be subject to heavy condensation and rapid changes in temperature or pressure, and where the connector is subject to high vibratory conditions. A type MIL-DTL-28840/12 receptacle does not provide moisture or vibration protection at its back end, and a type MIL-DTL-28840/10 or MIL-DTL-28840/11 should be used if such protection is desired.
Subject: Ambient conditions
Collections
:
-
Statistics
MIL-DTL-28840C (1)
Show full item record
contributor author | DLA - CC - DLA Land and Maritime | |
date accessioned | 2017-09-04T18:50:47Z | |
date available | 2017-09-04T18:50:47Z | |
date copyright | 40487 | |
date issued | 2010 | |
identifier other | KVSMDDAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/232223 | |
description abstract | This specification covers circular electrical connectors with removable crimp front release contacts. These connectors are for use with jacketed cable in shipboard applications.Intended Use: The various classes and types of connectors are intended for application as follows: a. MIL-DTL-28840/10 - are receptacles intended for wall or bulkhead flange mounting and for use with conduit backshells, or cable clamps. b. MIL-DTL-28840/11 - are receptacles intended for use at the end of a cable where mounting provisions are not required. c. MIL-DTL-28840/12 - are receptacles intended for mounting on shielding boxes and equipment eases. They have no fittings and are for use with open wiring. Individual wires should not exceed 12 inches in length. Box mount connectors will be used only in controlled atmosphere applications where environmental sealing is not required. d. MIL-DTL-28840/14 - are receptacles intended for wall or bulkhead jam nut mounting and for use with conduit or a cable clamp. e. MIL-DTL-28840/16 - are plugs intended for use at the end of a cable to be mated with a receptacle. f. MIL-DTL-28840/18 - are 90° plugs intended for use at the end of a cable where space does not permit the use of a straight plug. g. Connectors are intended for use with jacketed cable where the connectors will be subjected to high-impact shock conditions beyond the capabilities of the other class connectors. These connectors have crimp contacts which are removed from the front of the connector and a wire sealing range capable of sealing on Naval shipboard cable. These connectors also have a specified shell conductivity. h. These connectors are intended for use where the connector will be subject to heavy condensation and rapid changes in temperature or pressure, and where the connector is subject to high vibratory conditions. A type MIL-DTL-28840/12 receptacle does not provide moisture or vibration protection at its back end, and a type MIL-DTL-28840/10 or MIL-DTL-28840/11 should be used if such protection is desired. | |
language | English | |
title | MIL-DTL-28840C (1) | num |
title | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH DENSITY, HIGH SHOCK, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR | en |
type | standard | |
page | 54 | |
status | Active | |
tree | DLA - CC - DLA Land and Maritime:;2010 | |
contenttype | fulltext | |
subject keywords | Ambient conditions | |
subject keywords | Hot-spot temperature | |
subject keywords | Removable crimp front release contacts | |
subject keywords | Service life |