IEC 63044-3
English -- Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements - Edition 1.0;
French -- SystŠmes Electroniques pour les Foyers Domestiques et les Bƒtiments (HBES) et SystŠmes de Gestion Technique du Bƒtiment (SGTB) - Partie 3: Exigences de s‚curit‚ ‚lectrique - Edition 1.0
Organization:
IEC - International Electrotechnical Commission
Year: 2017
Abstract: Scope: This part of IEC 63044 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standard exists. In addition, it defines safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by IEC 62949. This document is applicable to – operator stations and other human–system interface devices, – devices for management functions, – control devices, automation stations and application-specific controllers, – field devices and their interfaces, and – cabling and interconnection of devices used within a dedicated HBES/BACS network. This document covers the following requirements and compliance criteria: • protection from hazards in the device; • protection from overvoltages on the network; • protection from touch current; • protection from hazards caused by different types of circuit; • protection of the communication wiring from overheating caused by excessive current.
Collections
:
Show full item record
contributor author | IEC - International Electrotechnical Commission | |
date accessioned | 2017-10-18T11:08:20Z | |
date available | 2017-10-18T11:08:20Z | |
date copyright | 2017.01.01 | |
date issued | 2017 | |
identifier other | VIQHUFAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/235488 | |
description abstract | Scope: This part of IEC 63044 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standard exists. In addition, it defines safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by IEC 62949. This document is applicable to – operator stations and other human–system interface devices, – devices for management functions, – control devices, automation stations and application-specific controllers, – field devices and their interfaces, and – cabling and interconnection of devices used within a dedicated HBES/BACS network. This document covers the following requirements and compliance criteria: • protection from hazards in the device; • protection from overvoltages on the network; • protection from touch current; • protection from hazards caused by different types of circuit; • protection of the communication wiring from overheating caused by excessive current. | |
language | English, French | |
title | IEC 63044-3 | num |
title | English -- Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements - Edition 1.0 | en |
title | French -- SystŠmes Electroniques pour les Foyers Domestiques et les Bƒtiments (HBES) et SystŠmes de Gestion Technique du Bƒtiment (SGTB) - Partie 3: Exigences de s‚curit‚ ‚lectrique - Edition 1.0 | other |
type | standard | |
page | 42 | |
status | Active | |
tree | IEC - International Electrotechnical Commission:;2017 | |
contenttype | fulltext |