AIR FORCE - 02 - Air Force Network Integration Center (AFNIC)
Browse by
Recent Submissions
-
SMC-S-005
Abstract: This document establishes the baseline requirements for the design, fabrication, assembly, installation, test, inspection, operation, and maintenance of pressure systems used in spacecraft and launch vehicles. It deals ... -
DOD-E-8983C
Abstract: This specification sets forth the general requirements for the design and manufacture of electronic components and equipment for space vehicles. The detailed performance and individual test requirements shall be as specified ... -
SMC-S-017
Abstract: Purpose
This document establishes standards for the development, testing, storage, handling, and usage of lithium-ion batteries for military spacecraft. Compliance with this standard is intended to ... -
MIL-STD-1540D
Abstract: This document requires that a process be established to develop and manage verification requirements to assure that launch and space equipment can function correctly and withstand stresses it may encounter during its life ... -
MIL-STD-1538
Abstract: This standard establishes procedures under which the contractor shall provide spare parts and maintenance services. -
SMC-T-001
Abstract: FOREWORD
This tailoring document defines the Government's requirements and expectations for contractor performance in defense system acquisitions and technology developments.
The new-issue SMC ... -
SMC-S-004
Abstract: Introduction
During launch and ascent, a spacecraft and its launch vehicle experience severe structural loads. These loads represent the principal design requirements for most of the launch vehicle and ... -
MIL-STD-1546B
Abstract: This standard establishes the requirements for the preparation, implementation, and operation of a parts, materials, and processes control program for use during the design, development, and production of space and launch ...Subject(s) : Baseline , Class S , control board , JAN Class S , lot , materials , MPCAG , operating stock , parts , PMP , PMP baseline , PMPCB , PMPSL , processes , registered , selection list , space , -
SMC-S-016
Abstract: Purpose
This Standard establishes the environmental and structural ground testing requirements for launch vehicles, upper-stage vehicles, space vehicles, and their subsystems and units. In addition, a ... -
MIL-HDBK-83575
-
SMC-S-010
Abstract: PURPOSE. This document establishes the minimum technical requirements for electronic parts, materials, and processes (electronic PMP) used in the design, development, and fabrication of space and launch vehicles. Application ... -
MIL-HDBK-340A VOL II
Abstract: This Volume II of the handbook provides additional information pertaining to the test requirements of the handbook, "test requirements for launch, upper stage and space vehicles".
This Vol II of the Handbook was written ... -
SMC-S-023 VOL 2
Abstract: Overview
The Human Machine Interface (HMI) Conventions Document has been developed under the direction of and with oversight from the United States (US) Air Force Space Command (AFSPC). It provides ... -
SMC-S-003
Abstract: APPLICATION
This document specifies quality assurance requirements that may be tailored by the procuring agency or proposed by the contractor. It is applicable to the prime contractors, subcontractors, ... -
MIL-STD-1542B
Abstract: PURPOSE
The purpose of this standard is to specify the design, performance, and verification requirements for electrical subsystems for space system facilities, including electromagnetic compatibility (EMC), electrical ...Subject(s) : Air terminals , Bond straps , Buildings , Cable trays , Cathodic protection , Earth electrode , Earth resistivity , Electrical power , Electromagnetic compatibility , Electromagnetic pulse (EMP) , Equipotential plane , Facility ground , Facility power , Filters , Ground Fault Detection , Ground rods , Grounding , Harmonic Distortion , High frequency circuits , Isolation , Lightning protection , Lightning rods , Multipoint ground , Power distribution , Shielded enclosures , Shielded rooms , Shielding , Structures , Technical ground , Technical power , Transformers , -
SMC-S-015
Abstract: End-of-life disposal of an Earth-orbiting satellite means 1) removing the satellite from the region of space where other satellites are operating so as not to interfere with these other users of space in the future, and ...