Recent Submissions

  • A-A-58042A VALID NOTICE 1 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This CID describes a Digital Data Analyzer with a minimum of 32 channels used for collecting data acquired in the timing and state analysis modes for electronic testing. This CID outlines the minimum requirements for this ...
  • A-A-59716 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2002
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This document covers a commercial, diesel engine driven, chassis-mounted, aircraft boarding staircase, to be used for passenger loading and unloading. The deck height of the staircase is adjustable to between 96 inches and ...
  • A-A-59865 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2010
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This Commercial Item Description (CID), describes a describes an insulation test set, a portable, high-voltage leakage test set for electrical insulators, measures current leakage across insulation, not capacity current, ...
    Subject(s) : High-voltage , Leakage , Portable ,
  • MIL-G-4937 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1955
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This specification covers an electric, pedestal, carbide tool bit grinding machine.
  • GGG-P-61A 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1966
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This specification covers precision-ground, hardened steel, and cast-iron parallels for use in supporting work in inspection, layout, and general machine-shop practice.
    This specification does not cover all types of ...
  • A-A-59409A VALID NOTICE 1 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This Commercial Item Description (CID) covers a portable, self contained, electrically powered lubricating unit. This unit supplies grease of viscous lubricant with high load carrying capacity for a temperature range of ...
  • TT-B-1325D 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2007
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This specification covers three types of retro-reflective beads used to reflectorize traffic and airfield marking paints. Intended Use: Type I, Gradation A, coarse - low-index recycled glass beads for drop-on ...
  • A-A-59257A 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2004
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This CID outlines the minimum requirements for a 500-Megahertz (MHz), four-channel oscilloscope with a two Giga-sample per second (GS/sec) sampling rate and digital storage, with a differential probe for making differential ...
  • A-A-59753 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2004
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This Commercial Item Description (CID) describes the minimum requirements for a Function Generator. The equipment, as described in this CID, shall have a minimum frequency range of 0.1 Hz to 4 MHz. This CID is meant as a ...
  • A-A-58000 VALID NOTICE 1 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This Commercial Item Description (CID), describes a 3000 and 6000 gallon horizontal cryogenic storage tank capable of storing and delivering liquid oxygen or liquid nitrogen.
    The storage tanks shall be of the following ...
  • A-A-59661A 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2009
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This Commercial Item Description (CID) describes a hand-held Transmission Impairment Measurement Set (TIMS). This CID is meant as a minimum requirement for the TIMS in which only those manufacturers that meet or surpass ...
    Subject(s) : Hand-held , Peak-to-Average-Ratio , Signal-to-Noise Ratio ,
  • A-A-58061 VALID NOTICE 1 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This Commercial Item Description(CID),describes a repair station for circuit boards. The equipment shall be of one type and style, used to repair a wide variety of electronic boards and components and is suited for depot ...
    Subject(s) : Console , Handpiece , Iron , Soldering and Desoldering , Tweezer , Work Station ,
  • A-A-58080B 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2009
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This commercial item description covers the general requirements for a diesel engine-driven, front wheel-drive, rear wheel steer, pneumatic-tired, 4,000 pound at 24 inch load-center capacity, forklift truck. It will be ...
    Subject(s) : Cargo , Loading platforms , Warehouses ,
  • GGG-P-61A (2) 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1980
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
  • A-A-1722 VALID NOTICE 2 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
  • A-A-59480 VALID NOTICE 1 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This CID describes a pressure gage tester and calibrator. The pressure gage tester is for testing direct pressure gages, relief valves, servos, pressure operated devices such as pressure switches, and static testing pressure ...
    Subject(s) : Indicator , PSI , Test ,
  • MIL-PRF-27720G 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2009
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This specification covers two types of skid-mounted, 400-gallon tanks for air transport and storage of liquid oxygen and liquid nitrogen.Intended Use: The TMU-24/E Types I and II storage tanks are intended ...
    Subject(s) : Annular space , Burst disc , Cryogenic , Inner shell , Outer shell , Pressure vessels , Skid base , Vacuum retention ,
  • A-A-59803 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2008
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This Commercial Item Description (CID) describes a hand-held Transmission Impairment Measurement Set (TIMS). This CID is meant as a minimum requirement for the TIMS in which only those manufacturers that meet or surpass ...
  • A-A-58051 VALID NOTICE 1 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This commercial item description (CID) covers optical flats used in laboratories, and in gage and inspection departments. Intended Use: Optical flats covered by this CID are intended for use with a monochromatic ...
  • A-A-50765A 

    Type: standard
    Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1996
    Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    Abstract: This commercial item description covers one type of forceps used for inserting and removing sheet holders during fabrication of components from sheet metal.

View more