درباره ما
Search
CSV
RISMIL-I-25470: INDICATOR, AZIMUTH AND RANGE IP-284A/APS
Abstract: This specification covers one type of azimuth and range indicator, designated Indicator, Azimuth and Range IP-284A/APS. Intended Use: The Indicator, Azimuth and Range, IP-284A/APS is intended for use as part ...
A-A-59790: BALANCER, VEHICLE WHEEL (ELECTRIC)
Abstract: This commercial item description (CID) covers a stationary, torque motor driven truck and vehicle wheel balancer for tube-type or tubeless tires used on trucks and vehicles. The operator driven vehicle should be capable ...
A-A-59381: OHMMETER
Abstract: This Commercial Item Description describes a soil resistance meter. The soil resistance meter is used to measure earth resistance and ground sensitivity. This CID is meant as a minimum requirement for the soil resistance ...
MIL-B-4548A: BENDING MACHINES, PIPE AND CONDUIT, AIRCRAFT, HYDRAULIC TYPE, FLOOR MOUNTED
Abstract: This specification covers floor-mounted, hydraulic-type, aircraft pipe and conduit bending machines. Intended Use: The bending machines covered by this specification are intended for use in cold-bending ...
A-A-59321A VALID NOTICE 1: Test Set, Transponder Set
Abstract: This Commercial Item Description (CID) describes a portable flight-line tactical air navigation (TACAN) test set (referred to herein as the test set). This CID is meant as a minimum requirement for the test set in which ...
MIL-PRF-32278B: GAUGE, TACTICAL AUTOMATED TANK (TATG) Fuels Operational Readiness Capability Equipment (FORCE)
Abstract: This specification describes a tactical automated tank gauging (TATG) system that is capable of accurately measuring the quantity of liquid petroleum in collapsible tactical fuel storage tanks, which are used throughout ...
MIL-PRF-9954D: GLASS BEADS: FOR CLEANING AND PEENING
Abstract: This specification covers glass beads to be used with pressure/suction type blasting equipment.Intended Use: The glass beads covered by this specification are intended for use in suction/pressure blasting ...
A-A-59790 VALID NOTICE 1: BALANCER, VEHICLE WHEEL (ELECTRIC)
Abstract: This commercial item description (CID) covers a stationary, torque motor driven truck and vehicle wheel balancer for tube-type or tubeless tires used on trucks and vehicles. The operator driven vehicle should be capable ...
A-A-59831: TRUCK, LIFT, FORK, ELECTRIC, SIT DOWN, SOLID TIRES, 4000 POUND CAPACITY AT 24 INCH LOAD CENTER, 144 INCHES MINIMUM LIFT HEIGHT
Abstract: Description.
This Commercial Item Description (CID) covers the general requirements for an electric, front wheel drive, rear-wheel steer, sit down operator, solid tired, 4000 pound at 24 inch load center capacity, ...
This Commercial Item Description (CID) covers the general requirements for an electric, front wheel drive, rear-wheel steer, sit down operator, solid tired, 4000 pound at 24 inch load center capacity, ...