درباره ما
AIR FORCE - 82 - San Antonio Air Logistics Center
Browse by
Recent Submissions
-
MIL-C-83242
Abstract: This specification covers nonmelting aromatic polyamide cord. Intended Use: The cord covered by this specification is intended for use as personnel parachute suspension lines and is also used with various ... -
A-A-59278
Abstract: This Commercial Item Description (CID) outlines the minimum requirements for a four-channel, 1 GHz digital storage oscilloscope. The digital storage oscilloscope provided shall be commercially-available test equipment ... -
MIL-B-83787
Abstract: This specification covers two aircraft lap safety belts designated Types MD-1 and MD-2. Intended Use: The Type MD-1 and MD-2 safety belt covered by this specification is intended for use to secure personnel ... -
A-A-58042A
Abstract: This CID describes a Digital Data Analyzer with a minimum of 32 channels used for collecting data acquired in the timing and state analysis modes for electronic testing. This CID outlines the minimum requirements for this ... -
MIL-PRF-25370F
Abstract: This specification covers one type of pneumatic inflator valve (life preserver, MA-1). Intended Use: The pneumatic inflator valve covered by this specification is intended to provide a means of piercing a ...Subject(s) : Actuator , Actuator safety restraint , Carbon dioxide cylinder , Hydrostatic pressure , Inflator valve , Leakage , Life preserver , Piercing mechanism , Valve stem cap , -
A-A-50757
Abstract: This Commercial Item Description (CID) specifies a portable four 50MM channel recorder which features a four-channel DC and amplifier range of 50MV to 500V full scale with a capability of a maximum common mode voltage of ... -
MIL-B-87167
Abstract: This specification covers one type of aircraft safety lap belt for the aircraft ejection seat systems described in 6.1. The belt is designated HBU-12/A. Intended Use: The lap belts covered by this ...