Search
Now showing items 1-10 of 216
A-A-58058: PROCESSING MACHINE, RADIOGRAPHIC FILM, AUTOMATIC, DEPLOYABLE
Abstract: This document defines the technical and performance requirements for a medium capacity, portable, processor machine, radiographic film, automatic, deployable suitable for automatic developing, fixing, washing and drying ...
A-A-59140: TEST SET, RADIO FREQUENCY POWER (POWER METER, DIGITAL) (50 MHZ TO 26.5 GHZ)
Abstract: This Commercial Item Description (CID) describes a digital single channel power meter with sensors, used for measuring continuous wave (CW) microwave and radio frequency (RF) power over selected frequencies. This CID is ...
A-A-50692: OSCILLOGRAPH, PORTABLE
Abstract: This Commercial Item Description (CID), decribes a Oscillograph Recorder. This CID is meant as a minimum requirement for the Oscillograph Recorder in which only those manufacturers that meet or surpass the following ...
A-A-59130: ANALYZER, SPECTRUM 10 KHZ TO 50 GHZ
Abstract: This CID outlines the minimum requirements for a programmable spectrum analyzer, with up to 100 Hertz (Hz) resolution bandwidth, which operates in the 10 Kilohertz (KHz) to 50 Gigahertz (GHz) range. The spectrum analyzer's ...
MIL-T-82011B: TRUCK, MAINTENANCE, POWER LINE INSULATOR WASHER, 28,000 POUNDS GVW, 4 X 4
Abstract: This specification covers a commercial, gasoline-engine-driven, four-wheel, four-wheel drive, power line insulator washer truck. Intended Use: The truck is primarily intended for washing insulators on high ...
MIL-C-26028: CALIBRATOR, ENGINE TEST CELL RATE OF FLOW MEASURING SYSTEM
Abstract: This specification covers an item to fill a need for a self-contained laboratory primary standard for the calibration of fluid flow measuring systems, or sensors. Fluid flow measuring systems are employed at the Wright ...
MIL-O-27959: OPERATION CENTRAL AN/TSQ-61
Abstract: This specification covers the design, fabrication, and test of an Operations Central designated AN/TSQ-61, for use as part of a Forward Air Control Post(FACP) in the surveillance and control of aircraft. Intended ...