Recent Submissions

  • MIL-DTL-24643/51F 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2009
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
  • QQ-L-201F 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1965
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification covers lead sheet used for chemical and structural purposes. Intended Use: Grade B lead sheet is intended for use in laboratories and shops Request PDF
  • MIL-M-28787/462 CANC NOTICE 2 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
  • MIL-STD-2042-4B 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2002
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This standard practice provides detailed methods for installing optical fiber cable cableways and cable protection on surface ships and submarines.
    Applicability. These criteria apply to installations on specific ...
    Subject(s) : Cable runs , Cable tags , Installation of optical fiber cable in cableways , Protection of cables ,
  • MIL-PRF-17773C INT AMD 1 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification covers the Automatic Bus Transfer Switch (ABT) (see 6.4.1) and the Manual Bus Transfer Switch (MBT) (see 6.4.13), herein referred to as ABT, MBT, or switch(es), for use on surface and submarine Naval ...
  • MIL-F-24259A 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1987
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification covers flowmeters for use in liquids such as fresh water, sea water, fuels and oils. The flow sensor, of the turbine, vortex, or drag type, shall be located in the liquid and actuated by the motion of ...
    Subject(s) : Digital readouts , Drag sensor , Electromagnetic interference , Electrostatic discharge , Flow rate , Flow sensor , Liquids , Turbine sensor , Vortex sensor ,
  • MIL-PRF-85045/20A 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1999
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
    The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF- ...
  • MIL-H-21367/14 VALID NOTICE 1 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
  • MIL-M-28787/121B CANC NOTICE 1 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
  • MIL-DTL-24231/2E 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
  • MIL-STD-2042-1B 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2002
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: Purpose. This standard provides detailed methods for fiber optic cable selection, handling, marking, and repair.
    Applicability. These criteria apply to installations on specific ships when invoked by the governing ...
    Subject(s) : Component , Connections , Marking , Penetrations , Repair , Selection , Storage and handling , Testing ,
  • MIL-V-24586A 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1985
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification covers the requirements of ¼-inch and ½-inch sized needle valves. Intended Use: Needle valves covered by this specification are intended for use for vent, drain, and fluid sampling ...
  • MIL-M-28787/363 CANC NOTICE 2 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
  • MIL-G-18014B 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1967
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification covers open, bar-type gratings, (flooring), for shipboard use.
    Gratings shall be of the following types, classes, and styles, as specified, (see 6.1).
            Type A - Steel, ...
  • MIL-PRF-24623/5C 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2001
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
  • MIL-T-16420K 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1978
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification covers two compositions of round copper-nickel alloy tube for basic piping systems on surface ships and submarines as referenced in MIL-STD-777 and MIL-STD-438. Tube and pipe sizes permit the use of Naval ...
  • A-A-59468 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1999
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This commercial item description (CID) covers stainless steel, air-cooled condenser type ice making machines intended for use in messrooms, galleys, medical spaces, and other areas where a continuous supply of ice is needed.
  • MIL-I-24768/24 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
    The requirements for acquiring the insulation material described herein shall consist of this specification ...
  • MIL-DTL-17557F 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification covers sample water coolers for Naval shipboard boiler water and feedwater sampling. Only one classification of cooler is covered by this specification.Intended Use: The sample water coolers ...
  • MIL-I-24718/2 

    Type: standard
    Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
    Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
    The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

View more