درباره ما
ANSI - American National Standards Institute: Recent submissions
Now showing items 21-40 of 1236
-
ANSI INCITS 360
Abstract: This standard defines multimedia command set extensions for Device Type 5 devices. The commands specified within this standard define standard access and control to those Features of the device that are used in multimedia ... -
ANSI INCITS 52
Abstract: This standards pecifiest he general,p hysical, and magnetic requirements for interchangeability of the singledisk cartridge (front loading) as required to achieve unrecordedc artridge interchangeb etween disk storage drives ... -
ANSI INCITS 424
Abstract: This standard describes the framing and signaling interface of a high performance serial link for support of FC-4s associated with upper level protocols (e.g., SCSI, IP, SBCCS, VI). This standard is based on FC-FS with ... -
ANSI INCITS 186
Abstract: This standard specifies a Hybrid Ring Control (HRC) protocol which provides a mode of operation in which both packet switched and isochronous data are transmitted within the same special frame structure, called a cycle. ... -
ANSI INCITS 117
Abstract: This standard defines the sizes and location of the printable/image areas common to both the IS0 A4 and North American paper sizes for international communication on text and facsimile equipment. Purpose. The purpose of ... -
ANSI INCITS 435
Abstract: This standard describes extensions to the Fibre Channel signaling and physical layer requirements defined in ANSI INCITS 404-2005, Information Technology - Fibre Channel - Physical Interfaces 2, to transport Fibre Channel ... -
ANSI INCITS 86
Abstract: This standard specifies optical character recognition (OCR) inks by their spectral characteristics for different users within the OCR community. It includes definitions, test methods, and information needed to apply this ... -
ANSI INCITS 151
Abstract: This standard (1) lists the preferred and common sheet sizes of bond papers and index bristols and their applicable tolerances, (2) cross references to metric sizes, and (3) referneces a standard test method. Purpose This ... -
ANSI INCITS 49
Abstract: This standard describes nominal shapes, sizes, and printing positions of OCR-B alphanumeric characters and symbols for optical character recognition (OCR) systems. Purpose. The purpose of this standard is to establish a ... -
ANSI INCITS 182
Abstract: This guideline covers the optical characteristics of a printed bar code symbol. This document shall be used with the appropriate application specifications, or symbology specifications, or both. The appropriate application ... -
ANSI INCITS 116
Abstract: This American National Standard is intended to provide a format and recording standard for a 0.250-inch (6.30-mm) wide, 4-track magnetic tape in a cartridge to be used for information interchange between information ... -
ANSI INCITS 48
Abstract: This American National Standard for unrecorded and recorded cassettes containing 3.8 1 -mm (O.l.SO-in) -wide magnetic tape presents the minimum requirements for mechanical and magnetic interchangeability of the cassette ... -
ANSI INCITS 76
Abstract: This standard specifies the general, physical, and magnetic requirements for interchangeability of the single-disk cartridge (top loading) as required to achieve unrecorded cartridge interchange between disk storages and ... -
ANSI INCITS 424 AMD 1
Abstract: This amendment to FC-FS-2 describes the incremental framing and signaling requirements for scrambling frames on Fibre Channel links. The requirements for use of Frame Scrambling on specific link technologies are described ... -
ANSI INCITS 150
Abstract: This sgtandard specifies the most commonly used character and line spacings for office machines and data processing equipment. -
ANSI INCITS 179
Abstract: This standard provides the mechanical, physical and magnetic properties of a low-friction disk with a diameter of 95 mm (3.740 inches) and with a typical recording density of 3 1.5 tracks per millimeter (tpmm) (800 tracks ... -
ANSI INCITS 115
Abstract: This standard specifies the general, physical, and magnetic requirements for interchangeability of the fivedisk pack, as required to achieve unrecorded pack interchange between disk storages and associated information ... -
-
ANSI INCITS 73
Abstract: This standard specifies the general, physical, and magnetic requirements for interchangeability of the singlesided flexible disk cartridge - for use at 6631 bits per radian (BPR) - as required to achieve unformatted disk ... -
ANSI INCITS 46
Abstract: This standard specifies the general, physical, and magnetic requirements for interchangeability of the magnetic six-disk pack, as required to achieve unrecorded pack interchange between disk storages and associated information ...