درباره ما
MIL-DTL-17505F
HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE
Organization:
NAVY - YD - Naval Facilities Engineering Command
Year: 1997
Abstract: This specification covers smooth-bore hose and hose assemblies for suction and discharge service in the transfer of fuels, such as Navy special fuel oil, diesel fuel, oil, jet fuel (JP-5 or JP-8), motor gasoline, and aviation gasoline. The hose is intended to handle petroleum products having an aromatic content no greater than 30 percent. The maximum working pressure of this hose is 150 pound-force per square inch (psi) (1 034 kilopascal (kPa)).
Hose covered by this specification shall be of one type, having a 4-, 6-, 8-, or 12-inch (102, 152, 203, or 305 millimetre (mm)) inside diameter (id), as specified (see 6.2). Intended Use: Hose and hose assembly are intended for use in the transfer of oil and gasoline from anchored tankers and barges to shore stations capable of handling discharge pressures up to 150 psi (1 034 kilopascal (kPa)).
Hose covered by this specification shall be of one type, having a 4-, 6-, 8-, or 12-inch (102, 152, 203, or 305 millimetre (mm)) inside diameter (id), as specified (see 6.2). Intended Use: Hose and hose assembly are intended for use in the transfer of oil and gasoline from anchored tankers and barges to shore stations capable of handling discharge pressures up to 150 psi (1 034 kilopascal (kPa)).
Subject: Fuels
Collections
:
Show full item record
| contributor author | NAVY - YD - Naval Facilities Engineering Command | |
| date accessioned | 2017-09-04T18:40:37Z | |
| date available | 2017-09-04T18:40:37Z | |
| date copyright | 35741 | |
| date issued | 1997 | |
| identifier other | JVDBEAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jse/handle/yse/222219 | |
| description abstract | This specification covers smooth-bore hose and hose assemblies for suction and discharge service in the transfer of fuels, such as Navy special fuel oil, diesel fuel, oil, jet fuel (JP-5 or JP-8), motor gasoline, and aviation gasoline. The hose is intended to handle petroleum products having an aromatic content no greater than 30 percent. The maximum working pressure of this hose is 150 pound-force per square inch (psi) (1 034 kilopascal (kPa)). Hose covered by this specification shall be of one type, having a 4-, 6-, 8-, or 12-inch (102, 152, 203, or 305 millimetre (mm)) inside diameter (id), as specified (see 6.2). Intended Use: Hose and hose assembly are intended for use in the transfer of oil and gasoline from anchored tankers and barges to shore stations capable of handling discharge pressures up to 150 psi (1 034 kilopascal (kPa)). | |
| language | English | |
| title | MIL-DTL-17505F | num |
| title | HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE | en |
| type | standard | |
| page | 16 | |
| status | Active | |
| tree | NAVY - YD - Naval Facilities Engineering Command:;1997 | |
| contenttype | fulltext | |
| subject keywords | Fuels | |
| subject keywords | Petroleum transfer |