Show simple item record

MICROCIRCUITS, FAST, CMOS, OCTAL TRANSCEIVER/REGISTER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T18:50:15Z
date available2017-09-04T18:50:15Z
date copyright08/05/1991
date issued1991
identifier otherKUEWDAAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std;jse/handle/yse/231649
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete PIN shall be as shown in the following example: CHART
The device type(s) shall identify the circuit function as follows:
    Device type          Generic number                        Circuit function          01                 54FCT646             Octal, three-state, bus transceiver/receiver         02                 54FCT646A            Octal, three-state, bus transceiver/receiver


The case outline(s) shall be as designated in appendix C of MIL-M-38510, and as follows:
    Outline letter                                Case outline            K               F-6 (24-lead, .640" × .420" × .090"), flat package           L               D-9 (24-lead, 1.280" × .310" × .200"), dual-in-line package           3               C-4 (28-terminal, .460" × .460" × .100"), leadless square chip                           carrier package


    Supply voltage - - - - - - - - - - - - - - - - - - - -   −0.5 V dc to +7.0 V dc     Input voltage range 2/ - - - - - - - - - - - - - - - -   −0.5 V dc to VCC + 0.5 V dc     Output voltage range  2/ - - - - - - - - - - - - - - -   −0.5 V dc to VCC + 0.5 V dc     DC input diode current (IIK) - - - - - - - - - - - - -   −20 mA     DC output diode current (IOK)- - - - - - - - - - - - -   −50 mA     DC output current  - - - - - - - - - - - - - - - - - -   ±100 mA     Maximum power dissipation (PD)  3/ - - - - - - - - - -   0.5 W     Thermal resistance, junction-to-case (θJC) - - - - - -   See MIL-M-38510, appendix C     Storage temperature range- - - - - - - - - - - - - - -   −65°C to +150°C     Junction temperature (TJ)- - - - - - - - - - - - - - -   +175°C     Lead temperature (soldering, 10 seconds) - - - - - - -   +260°C


    Supply voltage range (VCC) - - - - - - - - - - - - - -   +4.5 V dc minimum to +5.5 V dc maximum     Maximum low level input voltage (VIL)- - - - - - - - -   0.8 V dc     Minimum high level input voltage (VIH) - - - - - - - -   2.0 V dc     Case operating temperature (TC)- - - - - - - - - - - -   −55°C to +125°C     Minimum setup time, bus to clock (ts)- - - - - - - - -   4.5 ns     Minimum hold time, bus to clock (th) - - - - - - - - -   2.0 ns     Minimum pulse width (tw) - - - - - - - - - - - - - - -   6.0 ns


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-88775 REV Anum
titleMICROCIRCUITS, FAST, CMOS, OCTAL TRANSCEIVER/REGISTER, MONOLITHIC SILICONen
typestandard
page14
statusActive
treeDLA - CC - DLA Land and Maritime:;1991
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record