درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 121-140 of 9213
-
French -- Déclaration de matières pour des produits de et pour l’industrie électrotechnique - Edition 2.0|English -- Material declaration for products of and for the electrotechnical industry - Edition 2.0
Abstract: Scope: This document specifies the procedure, content, and form relating to material declarations for products and accessories of organizations operating in and supplying to the electrotechnical industry. Process chemicals, ... -
English -- Wind energy generation systems – Part 1: Design requirements - Edition 4.0
Abstract: Scope: This part of IEC 61400 specifies essential design requirements to ensure the structural integrity of wind turbines. Its purpose is to provide an appropriate level of protection against damage from all hazards ... -
French -- Techniques de mesure des oscillateurs piézoélectriques, diélectriques et électrostatiques – Partie 4: Méthodes d'essai de stabilité à court-terme de la fréquence - Edition 1.0|English -- Measurement techniques of piezoelectric, dielectric and electrostatic oscillators – Part 4: Short-term frequency stability test methods - Edition 1.0
Abstract: Scope: This part of IEC 62884 describes the methods for the measurement and evaluation of the short-term frequency stability tests of piezoelectric, dielectric and electrostatic oscillators. Its purpose is to unify the ... -
French -- Circuits intégrés – Circuits intégrés tridimensionnels – Partie 2: Alignement de puces empilées à petits pas d'interconnexion - Edition 1.0|English -- Integrated circuits – Three dimensional integrated circuits – Part 2: Alignment of stacked dies having fine pitch interconnect - Edition 1.0
Abstract: Scope: This part of IEC 63011 provides specifications of initial alignment and alignment maintenance between multiple stacked integrated circuits during the die bonding process. These specifications define the alignment ... -
English -- Printed electronics – Part 204: Materials – Insulator ink – Measurement methods of properties of insulator inks and printed insulating layers - Edition 1.0
Abstract: Scope: This part of IEC 62899 defines the terms and specifies the standard methods for characterisation and evaluation. This document is applicable to insulator inks and printed insulating layers that are made from insulator ... -
French -- Matériel de soudage à l'arc – Partie 7: Torches - Edition 4.0|English -- Arc welding equipment – Part 7: Torches - Edition 4.0
Abstract: Scope: This part of IEC 60974 specifies safety and construction requirements for TORCHES used for arc welding and allied processes. This document is applicable to MANUAL, MECHANICALLY GUIDED, AIR-COOLED, LIQUID-COOLED, ... -
French -- Appareils électromédicaux – Partie 2-83: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de luminothérapie à domicile - Edition 1.0|English -- Medical electrical equipment – Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment - Edition 1.0
Abstract: Scope: This part of IEC 60601 is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HOME LIGHT THERAPY EQUIPMENT, intended for use in the HOME HEALTHCARE ENVIRONMENT. HOME LIGHT THERAPY EQUIPMENT is typically used ... -
French -- Essais d’environnement – Partie 2-67: Essais – Essai Cy: Essai continu de chaleur humide, essai accéléré applicable en premier lieu aux composants - Edition 1.1; consolidated reprint|English -- Environmental testing – Part 2-67: Tests – Test Cy: Damp heat, steady state, accelerated test primarily intended for components - Edition 1.1; consolidated reprint
Abstract: Scope: This International Standard provides a standard test procedure for the purpose of evaluating, in an accelerated manner, the resistance of small electrotechnical products, primarily non hermetically sealed components, ... -
French -- Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses – Sécurité – Partie 2-1: Exigences particulières pour les perceuses portatives et les perceuses à percussion - Edition 1.0|English -- Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills - Edition 1.0
Abstract: Scope: This clause of Part 1 is applicable, except as follows Addition: This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be ... -
French -- Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-091: Exigences particulières pour les équipements à rayons X montés en armoire - Edition 2.0|English -- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems - Edition 2.0
Abstract: Scope: This part of IEC 61010 specifies particular safety requirements for cabinet X-ray systems, which fall under any of categories a), b) or c) below. Equipment covered by this document can be both PROTECTED EQUIPMENT ... -
English -- Industrial communication networks – Fieldbus specifications – Part 6-19: Application layer protocol specification – Type 19 elements - Edition 4.0
Abstract: Scope: General The Fieldbus Application Layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding ... -
English -- Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-4: Tests – Fibre or cable retention - Edition 2.0
Abstract: Scope: The purpose of this part of IEC 61300 is to ensure that the retention or attachment of the fibre, cord or cable in a fibre optic device or an enclosure will withstand tensile loads likely to be applied during normal ... -
French -- Dispositifs d’interconnexion et composants passifs fibroniques – Méthodes fondamentales d’essais et de mesures – Partie 2-46: Essais – Chaleur humide, essai cyclique - Edition 2.0|English -- Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-46: Tests – Damp heat, cyclic - Edition 2.0
Abstract: Scope: The purpose of this part of IEC 61300 is to describe a test to determine the suitability of a fibre optic device to withstand the environmental condition of high humidity and change of temperature which can occur ... -
English -- Secondary cells and batteries – Marking symbols for identification of their chemistry - Edition 1.0|French -- Batteries d'accumulateurs – Symboles de marquage pour l'identification de leur caractéristique chimique - Edition 1.0
Abstract: Scope: This document specifies methods for the clear identification of secondary cells, batteries, battery modules and monoblocs according to their chemistry (electrochemical storage technology). The markings described in ... -
French -- Transformateurs de mesure – Partie 14: Exigences supplémentaires concernant les transformateurs de courant pour application en courant continu - Edition 1.0|English -- Instrument transformers – Part 14: Additional requirements for current transformers for DC applications - Edition 1.0
Abstract: Scope: This part of IEC 61869 provides all requirements specific to current transformers to be used in DC applications (DCCTs), whatever the technology used. The output signal can be analogue or digital. It is applicable ... -
English -- Industrial communication networks – Profiles – Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC/IEEE 8802-3 - Edition 4.0
Abstract: Scope: This part of IEC 61784 specifies • performance indicators supporting classification schemes for Real-Time Ethernet (RTE) requirements; • profiles and related network components based on ISO/IEC/IEEE ... -
French -- Instrumentation pour la radioprotection – Portiques de détection des rayonnements (RPM) installés pour la détection du trafic illicite de matières radioactives et nucléaires - Edition 2.0|English -- Radiation protection instrumentation – Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials - Edition 2.0
Abstract: Scope: This document defines the performance requirements of installed monitors used for the detection of gamma and neutron radiation emitters. These monitors are commonly known as radiation portal monitors or RPMs. They ... -
English -- Optical fibre cables – Part 2-31: Indoor cables – Detailed specification for optical fibre ribbon cables for use in premises cabling - Edition 3.0
Abstract: Scope: This part of IEC 60794 presents the detailed requirements specific to this type of cable to ensure compatibility with the series of International Standards ISO/IEC 11801, Information technology – Generic cabling ... -
English -- Power capacitors – Low-voltage power factor correction banks - Edition 2.0
Abstract: Scope: This International Standard is applicable to low-voltage AC shunt capacitor banks intended to be used for power factor correction purposes, possibly equipped with a built-in switchgear and controlgear apparatus ... -
English -- Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 - Edition 2.0
Abstract: Scope: This part of IEC 61784 specifies the installation profiles for CPF 12 (EtherCAT™) 1. The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2018. 1 EtherCAT™ ...