درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 201-220 of 9213
-
French -- Échange d'informations pour le service d'itinérance de la recharge des véhicules électriques – Partie 1: Généralités - Edition 1.0|English -- Information exchange for electric vehicle charging roaming service – Part 1: General - Edition 1.0
Abstract: Scope: This part of IEC 63119 establishes a basis for the other parts of IEC 63119, specifying the terms and definitions, general description of the system model, classification, information exchange and security mechanisms ... -
English -- Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for surface acoustic wave (SAW) devices - Edition 3.0
Abstract: Scope: This part of IEC 61994 gives the terms and definition for single crystal wafers applied for surface acoustic wave (SAW) devices representing the state of the art, -
English -- Industrial communication networks – Fieldbus specifications – Part 4-3: Data-link layer protocol specification – Type 3 elements - Edition 4.0
Abstract: Scope: General The data-link layer provides basic time-critical messaging communications between devices in an automation environment. This protocol provides communication opportunities to a pre-selected “master” ... -
French -- Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses – Sécurité – Partie 3-4: Exigences particulières pour les tourets à meuler transportables - Edition 1.1; Consolidated Reprint|English -- Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-4: Particular requirements for transportable bench grinders - Edition 1.1; Consolidated Reprint
Abstract: Scope: This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable bench grinders that can be equipped with one or two accessories as follows: – type 1 grinding ... -
English -- Maritime navigation and radiocommunication equipment and systems – Automatic identification systems (AIS) – Part 2: Class A shipborne equipment of the automatic identification system (AIS) – Operational and performance requirements, methods of test and required test results - Edition 3.0
Abstract: Scope: This part of IEC 61993 specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards adopted by IMO in Resolution MSC.74(69):1998, ... -
French -- Technologies des piles à combustible – Partie 3-100: Systèmes à piles à combustible stationnaires – Sécurité - Edition 2.0|English -- Fuel cell technologies – Part 3-100: Stationary fuel cell power systems – Safety - Edition 2.0
Abstract: Scope: This part of IEC 62282 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through ... -
French -- Étalonnage des appareils de mesure de longueur d'onde / appareil de mesure de la fréquence optique – Partie 3: Fréquencemètres optiques faisant référence en interne à un peigne de fréquence - Edition 1.0|English -- Calibration of wavelength / optical frequency measurement instruments – Part 3: Optical frequency meters internally referenced to a frequency comb - Edition 1.0
Abstract: Scope: This part of IEC 62129 describes the calibration of optical frequency meters using an optical frequency comb as an internal reference. It is applicable to instruments measuring the optical frequency emitted from ... -
French -- Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection – Partie 12: Dispositifs de mesure et de surveillance des performances (PMD) - Edition 2.0|English -- Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures – Part 12: Performance measuring and monitoring devices (PMD) - Edition 2.0
Abstract: Scope: This part of IEC 61557 specifies requirements for power metering and monitoring devices (PMD) that measure and monitor the electrical quantities within electrical distribution systems, and optionally other external ... -
English -- Industrial communication networks – Fieldbus specifications – Part 6-2: Application layer protocol specification – Type 2 elements - Edition 4.0
Abstract: Scope: General The Fieldbus Application Layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding ... -
French -- Dispositifs photovoltaïques - Partie 3: Principes de mesure des dispositifs solaires photovoltaïques (PV) à usage terrestre incluant les données de l'éclairement énergétique spectral de référence - Edition 4.0; Includes Access to Additional Content|English -- Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data - Edition 4.0; Includes Access to Additional Content
Abstract: Scope: This part of IEC 60904 applies to the following photovoltaic devices for terrestrial applications: – solar cells with or without a protective cover; – sub-assemblies of solar cells; – modules; and ... -
English -- Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements - Edition 3.0
Abstract: Scope: Replacement: This part of IEC 60730 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use, including heating, air-conditioning and similar ... -
French -- Matériel de soudage à l’arc – Partie 3: Dispositifs d’amorçage et de stabilisation de l’arc - Edition 4.0|English -- Arc welding equipment – Part 3: Arc striking and stabilizing devices - Edition 4.0
Abstract: Scope: This part of IEC 60974 specifies safety requirements for industrial and professional ARC STRIKING and ARC STABILIZING DEVICES used in arc welding and allied processes. This document is applicable to ARC STRIKING and ... -
French -- Appareillage à basse tension - Partie 9-1: Systèmes actifs de limitation des défauts d'arc - Dispositifs d'extinction d'arc - Edition 1.0|English -- Low-voltage switchgear and controlgear -Part 9-1: Active arc-fault mitigation systems - Arc quenching devices - Edition 1.0
Abstract: Scope: This part of IEC 60947 covers low-voltage arc quenching devices, hereinafter referred to as AQDs, which are intended to eliminate arc-faults in low-voltage assemblies (typically lowvoltage switchgear and controlgear ... -
French -- Câbles à fibres optiques – Partie 2-30: Câbles intérieurs – Spécification de famille pour les câbles à rubans de fibres optiques utilisés dans les assemblages de câbles connectorisés - Edition 3.0|English -- Optical fibre cables – Part 2-30: Indoor cables – Family specification for optical fibre ribbon cables for use in terminated cable assemblies - Edition 3.0
Abstract: Scope: This part of IEC 60794 is a family specification which covers indoor optical fibre ribbon cables for use in terminated cable assemblies. The requirements of the sectional specification IEC 60794-2 are applicable to ... -
English -- Medical electrical equipment – Part 4-3: Guidance and interpretation – Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements - Edition 2.0
Abstract: Scope: This part of IEC 60601, which is a Technical Report, contains a series of recommendations developed by an expert working group of IEC subcommittee 62A in response to questions of interpretation of IEC 60601-1:2005 ... -
English -- Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal - Edition 3.0
Abstract: Scope: This part of IEC 61994 gives the terms and definition for synthetic quartz crystals representing the state of the art, which are intended for manufacturing piezoelectric and optical elements -
English -- (R) Vehicle Acceleration Measurement
Abstract: Scope: To define a test procedure that will provide a repeatable measure of a vehicle's launch response and maximum accelleration performance.PurposeThis SAE Recommended Practice provides a standardized means of ... -
French -- Modules de LED pour éclairage général - Exigences de performance IEC - Edition 1.2; Consolidated Reprint|English -- LED modules for general lighting - Performance requirements - Edition 1.2; Consolidated Reprint
Abstract: Scope: This International Standard specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. The following types of LED modules ... -
English -- Field device tool (FDT) interface specification - Part 51-20: Communication implementation for common object model - IEC 61784 CPF 2 - Edition 1.0
Abstract: Scope: This part of the IEC 62453-51-xy series, which is a Technical Report, provides information for integrating the CIP™ technology into the COM-based implementation of FDT interface specification (IEC TR 62453-41) ...