درباره ما
MIL-DTL-14465F
LIGHTS, COMPOSITE, 24 VOLTS DIRECT CURRENT (NOMINAL) VEHICULAR
Organization:
ARMY - AT - Tank-Automotive and Armaments Command
Year: 2010
Abstract: This specification covers two types of vehicular composite light assemblies each consisting of a service driving light, infrared driving light, blackout driving light, and a blackout marker light. The vehicular composite light assemblies are referred to herein as "light assemblies". The light assemblies are designed for use on military tracked vehicles equipped with nominal 24-volt (V) direct current (dc) electrical systems (see 6.1).Intended Use: Light assemblies covered by this specification are intended for use on military tracked vehicles to provide general illumination ahead of the vehicle for the safe operation of the vehicle during darkness and other conditions of reduced visibility. The two types covered by this specification are similar except for their base assemblies. The light assemblies are designed for use with sealed-beam units and lamp bulbs having a design voltage of 28 Vdc. The light assembly covered by this specification are military unique because they must be able to operate satisfactorily at ambient temperatures ranging from minus 55 °C to plus 71 °C. Commercial components are not designed to withstand such extreme environmental conditions and would experience failure.
Subject: Blackout
Collections
:
Show full item record
| contributor author | ARMY - AT - Tank-Automotive and Armaments Command | |
| date accessioned | 2017-09-04T16:38:19Z | |
| date available | 2017-09-04T16:38:19Z | |
| date copyright | 02/02/2010 | |
| date issued | 2010 | |
| identifier other | VHXCQCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsein=autho162l-Standards6/handle/yse/101847 | |
| description abstract | This specification covers two types of vehicular composite light assemblies each consisting of a service driving light, infrared driving light, blackout driving light, and a blackout marker light. The vehicular composite light assemblies are referred to herein as "light assemblies". The light assemblies are designed for use on military tracked vehicles equipped with nominal 24-volt (V) direct current (dc) electrical systems (see 6.1).Intended Use: Light assemblies covered by this specification are intended for use on military tracked vehicles to provide general illumination ahead of the vehicle for the safe operation of the vehicle during darkness and other conditions of reduced visibility. The two types covered by this specification are similar except for their base assemblies. The light assemblies are designed for use with sealed-beam units and lamp bulbs having a design voltage of 28 Vdc. The light assembly covered by this specification are military unique because they must be able to operate satisfactorily at ambient temperatures ranging from minus 55 °C to plus 71 °C. Commercial components are not designed to withstand such extreme environmental conditions and would experience failure. | |
| language | English | |
| title | MIL-DTL-14465F | num |
| title | LIGHTS, COMPOSITE, 24 VOLTS DIRECT CURRENT (NOMINAL) VEHICULAR | en |
| type | standard | |
| page | 17 | |
| status | Active | |
| tree | ARMY - AT - Tank-Automotive and Armaments Command:;2010 | |
| contenttype | fulltext | |
| subject keywords | Blackout | |
| subject keywords | Driving | |
| subject keywords | Filter | |
| subject keywords | Infrared | |
| subject keywords | Lens | |
| subject keywords | Sealed beam |