Now showing items 401-420 of 832

    • A-A-52494 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-59326/14B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a female by external pipe thread reducer, type XIII, to be used in conjunction with fittings having an internal pipe thread and male type cam locking coupling halves.
    • A-A-52476 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1993
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-P-3306E and MS51084C which are canceled.
    • A-A-52553 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers a pneumatic nail-driving hammer. The hammer is intended for driving nails.
    • A-A-52508A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers a non-luminous battery-generator voltage indicator (voltmeter) for 28 volt (V)(nominal) direct current (dc) electrical systems.
    • A-A-52502B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2010
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers requirements for a 3 inch (in.) hull drain poppet valve assembly, which is used to drain water out of vehicles. The valve assembly consists of a valve, seat, spring, and knob.
      Subject(s) : Knob , M9 ACE , Pin , Seat , Spring , Water ,
    • MIL-PRF-53027B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a 6-inch (in.), lightweight, collapsible rubber hose assembly for drinking (potable) water (see 6.1). Intended Use: The hose assembly is intended for use with light-weight, ...
      Subject(s) : Beverage , Collapsible-hose pipelines , Fittings nonmetallic , Food service , sanitary medical ,
    • MIL-PRF-52748F VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52546/1 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-59326/22A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a Female x Female, Type XXII, adapter to be used with Male Cam Locking Coupling Ends.
    • A-A-52483 VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-PRF-52666F VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers 15-, 50-, 100-, and 350-gallon-per-minute (gpm) filter/separators for use in removing undissolved water and solid contaminants from petroleum fuels. Intended Use: The types and ...
      Subject(s) : Airfield refueling system , Aviation fuel , Diesel fuel , Fuel decontamination equipment , Inland petroleum distribution system , Jet turbine fuel , Marine diesel fuel , Water separation ,
    • MIL-HDBK-400 VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52166B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2010
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description (CID) covers four types of commercial gasoline engine driven snowmobiles: moderate speed, high speed, high traction and heavy duty.
      Subject(s) : Inclement Weather Transport , Tactical Vehicle ,
    • MIL-PRF-62048C VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52535 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1995
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description (CID) applies to a single type of portable pneumatic drill in the 55 pound weight class. The drill is intended for drilling rock, brick and concrete in general construction and maintenance work.
    • MIL-PRF-53063B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers lightweight, noncollapsible, elastomer fuel hose assemblies. Intended Use: This lightweight, noncollapsible hose is intended for use with forward area refueling systems for suction ...
      Subject(s) : Couplings ,
    • MIL-PRF-62410B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers the performance, design, and test requirements for swaged hydraulic tube assemblies which provide hydraulic fluid, under pressure, to vehicle hydraulic system components. Tube assembly is swaged, ...
      Subject(s) : Fitting , Hydrostatic pressure ,
    • A-A-52514 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-59686 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2001
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description (CID) covers requirements for diesel-fired engine coolant preheaters, known hereinafter as preheaters. The purpose of a preheater is to preheat water-cooled diesel engines that are at ambient ...
      Subject(s) : Cold start aid , Heater ,