TIA - Telecommunications Industry Association: Recent submissions
Now showing items 501-520 of 1186
-
TIA TIA-1135
Abstract: This document provides an interoperability specification between a RAN that supports UMB, the AT and other access technologies. This document contains message procedures and formats necessary to obtain this interoperability. -
TIA TIA-41.000-E-8
Abstract: This part defines the range of application of the current issue of the series. It focuses on overall objectives and basic assumptions. Procedural details are presented in the other recommendations. -
TIA TSB-473
Abstract: This GREEN Study investigates protocol enhancements which can potentially reduce power consumption, extend battery life, and better match the available power in both network and terminal equipment. The subject of this work ... -
TIA TIA-102.AACA
Abstract: The Project 25 standard covers all of the parts of a system for public safety land mobile radio communications. These systems include subscriber units, base stations and other fixed equipment. The subscriber units include ... -
TIA TIA-102.CABA
Abstract: SCOPE AND LIMITS OF TESTING
Interoperability testing as described in this document is limited to functional operations integral to the performance of voice and supplemental data procedures between ... -
TIA TIA-658
Abstract: INTRODUCTION
General Description
This standard defines procedures on the L Interface for support of circuit-mode and packet-mode data transmission on TIA/EIA/IS-95 and ANSI J-STD-008 ... -
TIA TIA-455-235
Abstract: This part of IEC 61280 specifies two main methods for the determination of low BER values by making accelerated measurements. These include the variable decision threshold method (Clause 4) and the variable optical threshold ... -
TIA TIA/EIA/IS-798
Abstract: Foreword
This standard has been produced jointly by members of the Telecommunications Industry Association (TIA) subcommittee TR45.1
This standard describes the mechanical and vehicle interface ... -
TIA TIA/EIA-732-870
Abstract: Introduction
This Part provides the state transition tables for the Mobile Network Registration Protocol (MNRP) specified in Part 507.
MNRP is an asymmetric protocol, which means that the ... -
TIA TSB-185
Abstract: This TSB provides information on the MICE (Mechanical; Ingress; Climatic/Chemical; and, Electromagnetic) environmental classification system including some examples. -
TIA TIA-470.230-C
Abstract: This standard defines the DTMF, Pulse Dial, and Flash network signaling performance requirements for Customer Premises Equipment (CPE) intended for connection to the Public Switched Telephone Network (PSTN). These requirements ... -
TIA TIA/EIA-829
Abstract: Introduction
This service description document details the Inband Signaling Protocol between Transcoder/Rate Adapter Units (TRAU) for speech traffic channels for the Tandem Free Operation (TFO) of ... -
TIA TIA-41.323-E
Abstract: INTRODUCTION
Unless otherwise noted, the scenarios in this Part depict features operating individually; i.e., feature interactions are not considered unless specifically noted.
The scenarios in ... -
TIA TIA-607-B
Abstract: General
Telecommunications, as used in this Standard, refers to the transmission of all forms of information (e.g., voice, data, video, security, audio, industrial, building control). Telecommunications ... -
TIA TIA/EIA-732-831
Abstract: This Part provides the PICS proforma for the MDLP protocol as specified in Part 403 in compliance with the relevant requirements and in accordance with the relevant guidance given in [ISO-9646-2]. This PICS applies to both ... -
TIA TIA-41.000-E-2
Abstract: This part defines the range of application of the current issue of the series. It focuses on overall objectives and basic assumptions. Procedural details are presented in the other recommendations. -
TIA TSB-149
Abstract: The purpose of this TSB is to provide generic guidelines for users and consumers of "industry standard" optical connectors as defined by the TIA-604-XXX series of Fiber Optic Intermateability Connector Interface Standards ... -
TIA TIA-683-E-1
Abstract: Over-the-Air Service Provisioning (OTASP) consists of the following features provisioned over-the-air:- Download of NAM operational parameters.
- Electronic Key Exchange for securely establishing the ...
-
TIA LEB 3
Abstract: Foreword
The central purposes of this EIA Engineering Bulletin are:
a.) to provide interpretation of the language and intent of the BRH Guide for Submission of Information on Lasers and Products Containing Lasers ...

درباره ما