درباره ما
ISA - International Society of Automation: Recent submissions
Now showing items 241-258 of 258
-
ISA 100.11A
Abstract: This project will define the OSI layer specifications (e.g., PhL, DL, etc.), security specifications, and management (including network and device configuration) specifications for wireless devices serving application ... -
ISA 75.10.01
Abstract: This document applies to valves, sizes 1 inch through 26 inches, of the clamp or pinch valve design, incorporating clamp or pinch elements.
Purpose
The purpose of this document is to establish requirements for clamp ... -
ISA 60079-10-2
Abstract: This standard is concerned with the identification and classification of areas where explosive dust atmospheres and combustible dust layers are present, in order to permit the proper assessment of ignition sources ... -
ISA 75.19.01
Abstract: This standard applies to control valves having bodies, bonnets, cover plates, and bottom flanges made of carbon steel, low alloy and high alloy (stainless) steel, nickel-base alloy, cast iron, and ductile iron.
This ... -
ISA TR84.00.03
Abstract: Scope and purpose
A process hazards analysis is used to identify the safety functions necessary to reduce the risk of identified hazardous events. When a safety function is implemented in a safety ... -
ISA 20.00.03
Abstract: This standard establishes requirements for instrument specification forms to be published by ISA. Its use is recommended for organizations that develop their own equivalent specification forms.
The guidelines set forth ... -
ISA 62381
Abstract: General applicability
This standard defines procedures and specifications for the Factory Acceptance Test (FAT), the Site Acceptance Test (SAT), and the Site Integration Test (SIT) of an industrial ... -
ISA RP12.4
Abstract: This recommended practice applies to equipment made suitable for use in hazardous (classified) locations by the use of a pressurizing system.
This recommended practice applies both to equipment with and without an ... -
ISA 77.70.02
Abstract: This standard covers the mechanical design, engineering, fabrication, installation, testing, and protection of fossil power plant instrumentation sensing and control lines. The boundaries of this standard span the process ... -
ISA 60079-27
Abstract: This standard contains the details of apparatus, systems and installation practice for use with the Fieldbus Intrinsically Safe Concept (FISCO) for installation and use in Class I, Zones 0 and 1 and the ... -
ISA 84.00.01 P3
Abstract: This part provides information on
The underlying concepts of risk, the relationship of risk to safety integrity, see Clause 3;
The determination of tolerable risk, see Annex A;
- a number of different methods ... -
ISA TR12.21.01
Abstract: This technical report provides guidance on the safe use of fiber optic systems and their constituent parts producing or guiding visible, near infrared, or mid infrared (maximum wavelength of 10 μm) radiation in Class ...Subject(s) : Class I locations , explosive gas atmosphere , fiber optic cable , fiber optic terminal device , Fiber optics , hazardous (classified) locations , laser , National Electrical Code , nonbeam hazards , optical fiber , -
ISA 88.00.04
Abstract: This Part 4 standard defines a reference model for batch production records containing information about production of batches or elements of batch production. This standard is intended for batch processes. -
ISA 75.08.02
Abstract: This standard applies to flanged and flangeless rotary control valves using a full ball or a segment of a ball and other rotary-stem control valves, sizes (20 mm) 3/4 inch through (600 mm) 24 inches for Classes 150 through ... -
ISA TR75.25.02
Abstract: This technical report applies to throttling control valves in closed loop control applications. The concept has some application to open loop control applications. It does not address control valves used in on-off control ...Subject(s) : Accessories , actuator , amplitude , backlash , bench test , closed loop , closed loop time constant , control valve , dead band , dead time , dynamic response , flow coefficient , hunting , in-process test , laboratory test , limit cycle , motion conversion mechanism , nonlinear , open loop , overshoot , process control , process response , resolution , response , static , steady state , stem position , step change , step input signal changes , step response time , step size , step test , throttling control valve , time constant , valve , velocity limiting. , -
ISA RP60.11
Abstract: This recommended practice describes general crating methods available for protection against physical damage, vibration, pilferage, and climate. It also describes the various procedures and problems involved in handling, ... -
ISA RP60.1
Abstract: This portion of ISA-RP60 is intended to be used as a guide in the preparation of engineering designs and specifications for control center facilities (see 1.2).
Because of the wide variety of industries using control ... -
ISA 67.02.01
Abstract: This Standard covers design, protection, and installation of nuclear safety-related instrument-sensing lines and sampling lines for nuclear power plants. The Standard covers the pressure boundary requirements for sensing ...