Now showing items 381-400 of 533

    • TAPPI TIP 0606-08 

      Type: standard
      Source: TAPPI - TAPPI:;2002
      Organization : TAPPI - TAPPI
    • TAPPI T 580 PM 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Abstract: This method describes the procedure for measuring bulking thickness and variations in tissue paper and tissue products.
      This test method uses a relatively low pressure 2 kPa (0.3 psi) because of the collapsible structure ...
    • TAPPI T 515 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI
    • TAPPI T 252 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Abstract: This procedure provides for the extraction of pulp, paper, and paperboard samples using boiling reagent water followed by determination of the pH and conductivity of the extract.
    • TAPPI TIP 0304-44 

      Type: standard
      Source: TAPPI - TAPPI:;2001
      Organization : TAPPI - TAPPI
    • TAPPI TIP 0402-26 

      Type: standard
      Source: TAPPI - TAPPI:;2005
      Organization : TAPPI - TAPPI
    • TAPPI T 648 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI
    • TAPPI TIP 0304-14 

      Type: standard
      Source: TAPPI - TAPPI:;2002
      Organization : TAPPI - TAPPI
    • TAPPI TIP 0305-33 

      Type: standard
      Source: TAPPI - TAPPI:;2007
      Organization : TAPPI - TAPPI
    • TAPPI T 812 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2008
      Organization : TAPPI - TAPPI
    • TAPPI TIP 0106-02 

      Type: standard
      Source: TAPPI - TAPPI:;2005
      Organization : TAPPI - TAPPI
    • TAPPI T 282 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2013
      Organization : TAPPI - TAPPI
      Abstract: This method describes a procedure to determine hexeneuronic acid groups (HexA) in chemical pulps. HexA affects the kappa number determination by reaction with permanganate, and can react with certain bleaching chemicals, ...
    • TAPPI T 509 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: This method measures the hydrogen ion concentration of a cold aqueous extract (unfiltered) of paper, expressed in terms of pH value.
      It is suitable for writing, printing, and sized industrial papers, but is not intended ...
      Subject(s) : Acidity , Alkalinity , Extraction , Paper , pH ,
    • TAPPI TIP 0402-03 

      Type: standard
      Source: TAPPI - TAPPI:;2010
      Organization : TAPPI - TAPPI
      Abstract: This document provides guidelines and describes quality control and testing procedures for application of either stainless steel or nickel-base corrosion resistant weld metal overlay (hereafter referred to as CRO) on ...
      Subject(s) : Corrosion , Corrosion prevention , Digesters , Nondestructive tests , Overlays , Stainless steel , Welding ,
    • TAPPI T 822 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: The ring crush test correlates with edgewise compression strength of paperboard (1,2).
      This method is intended for paperboard between 0.28 mm (0.011 in.) and 0.61 mm (0.024 in.) thick. It may be used with less ...
      Subject(s) : Compression tests , Corrugated boards , Edge crush resistance , Fiberboards , Paperboard , Ring crush tests ,
    • TAPPI TIP 0416-15 

      Type: standard
      Source: TAPPI - TAPPI:;2005
      Organization : TAPPI - TAPPI
    • TAPPI T 255 CM 

      Type: standard
      Source: TAPPI - TAPPI:;2007
      Organization : TAPPI - TAPPI
    • TAPPI TIP 0808-05 

      Type: standard
      Source: TAPPI - TAPPI:;2005
      Organization : TAPPI - TAPPI
    • TAPPI T 802 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Abstract: This method describes procedures for determining the ability of fiberboard containers to protect their contents and/or to withstand impact in free-fall drops. These procedures are specifically designed for controlled drop ...
    • TAPPI TIP 0607-25 

      Type: standard
      Source: TAPPI - TAPPI:;2005
      Organization : TAPPI - TAPPI