درباره ما
ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center: Recent submissions
Now showing items 441-460 of 732
-
MIL-C-44001B
Abstract: This specification covers one type and size of chemical protective helmet cover. Intended Use: The cover provides chemical protection for the Ground Troops - Parachutists Helmet.Subject(s) : Chemical protection , Clothing , special purpose , Parachutist's helmet , -
MIL-C-43603B
Abstract: This specification covers a 2 quart capacity collapsible, plastic water canteen with or without a cover. Intended Use: The collapsible canteen with or without a cover is intended for use in temperate and ... -
MIL-H-43162F
Abstract: This document covers a woman\'s wool or polyester and wool hat. Intended Use: The hats are intended for wear by female personnel of the Department of the Army, as a component of the woman\'s Army Green service ...Subject(s) : Hat , service woman\'s , Polyester and wool , Wool , -
MIL-PRF-13312R
Abstract: This document covers two types of panel mounted, mechanical, refrigeration units having a capacity of 10,000 British thermal units (Btu) per hour and used with the prefabricated, panel type refrigerator (see 6.1). ...Subject(s) : Diesel-powered , Electric-powered , Food preservation , field , Food storage , field , Refrigeration , field , -
A-A-59128
Abstract: This commercial item description (CID) covers one type and size, 4-seat capacity dining table. Intended Use: The table is intended for use in military dining halls. -
A-A-52124
Abstract: The General Services Administration has authorized the use of this Commercial Item Description. -
A-A-52114A
Abstract: The General Services Administration has authorized the use of this Commercial Item Description in preference to type II, class D of Federal Specification GGG-H-506.
Abstract. This commercial item description ... -
MIL-DTL-32438
Abstract: This specification describes the criteria for a hot beverage box (HBB) consisting of a potable water pouch (with fitment and detachable spigot cap) in a collapsible fiberboard box, one heater/heater bag assembly, one ... -
A-A-52056
Abstract: Intended Use: The twine is intended for use in serving and whipping rope ends and splices, for aircraft rigging, and for use in ammunition fuses. -
A-A-50121A
Abstract: The General Services Administration has authorized the use of this commercial item description. Intended Use: The crampon protectors are intended to be used to cover the points of the crampons when not in ... -
MIL-B-44418
Abstract: This specification covers five types of boot walls. Intended Use: The boot walls are intended to provide an interface panel between a SICPS tent command post and a vehicle. The class 1 boot wall is to be ...Subject(s) : M1037 , M1038 , M577 , M998 , Rigid wall shelter , S250 , -
A-A-59151
Abstract: This commercial item description (CID) covers one size of molded plastic tool chest with a removable tray. Intended Use: The chest is intended to be used to contain and protect tools and equipment required ... -
MIL-C-44217A
Abstract: This specification covers one type and size of canteen cap. Intended Use: The assembled canteen cap is used as a component of the 5-quart collapsible canteen.Subject(s) : Individual equipment ,