NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 461-480 of 2147
-
MIL-J-7093A
Abstract: This specification covers the solid propellant rocket motor JATO Mark 6 Mod 1, 15KS-1000, referred to herein as rocket motor or unit. Intended Use: The Jato Mk 6 Mod 1 is intended for use as a jet assisted ... -
MIL-C-85728
Abstract: This specification establishes the requirements for design, construction, performance and testing of the Chaff Countermeasures (Type RR-( )/AL. This countermeasure is a Chaff Head (CH) that is used in conjunction with the ...Subject(s) : 1. Arena test , 10. Lot , chaff-hank , 11. Lot , chaff head , 12. Metal smear , 13. Muffin , 14. Muffin pack , 15. Payload , chaff , 16. Radar Cross-Section , 17. Unit , 2. Chaff Head , static , 3. Coating , slip , 4. Cut , chaff , 5. Dipole , 6. Hank , chaff , 7. Head , Chaff , 8. Launch range , 9. Lot , chaff-cut , -
MIL-F-8815/7B
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the filter element described herein shall consist of this document and the ... -
A-A-1864A
Abstract: The General Services Administration has authorized the use of this commercial item description in preference to Federal Specification W-L-00116D/GEN and W-L-00116/55. -
W-L-101/80A
Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
(This specification sheet forms a part of the latest issue of ... -
MIL-PRF-32148
Abstract: The specification covers filter-separator elements for aviation and distillate fuel for use in shipboard systems in conjunction with MIL-PRF-15618 (see 6.7). The filter-separator elements described in this specification ...Subject(s) : Coalescer , Fiber migration , Fuel component , Housings , Inhibitors , Water removal , -
MIL-DTL-85633C VALID NOTICE 1
Abstract: This specification covers five types of continuous wear anti-exposure flyers' coveralls designated as CWU-62B/P, CWU-74/P, CWU-62C/P, CWU-86/P and CWU-87/P. Intended Use: The coveralls are military unique ...Subject(s) : Dry-Suit , Flight Clothing , Neck Seal , Sealing Machine , Heat , Shelf-life , Water Immersion , Wrist Seal , -
W-L-101/66A
Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
(This specification sheet forms a part of the latest issue of ... -
MIL-PRF-23699F
Abstract: This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100°C and which are typically made with neopentyl ...Subject(s) : Corrosion inhibition , High thermal stability , Lubricant , -
MIL-B-23958A
Abstract: This specification establishes the requirements of brushes used to apply metal cleaners and brightening agents to aircraft metal surfaces. Intended Use: The brush covered by this specification is intended ... -
MIL-L-81979
Abstract: This specification covers two dual purpose airborne external store rocket launchers capable of shipping and storing four 5.0-inch ZUNI Rocket Motors, and launching four 5.0-inch ZUNI rockets. Intended Use: ... -
MIL-C-22442/16B
Abstract: [B circled] Inactive for new design after 2 September 1988. No superseding specification.
This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is ...

درباره ما