درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 501-520 of 2147
-
MIL-D-23615C
Abstract: This specification covers the general requirements for design and establishes uniform methods for testing cartridge actuated devices, (CADs). Guns, rockets, rocket catapults, ballistic hose/tubing, and stores separation ...Subject(s) : Feasibility tests , Functional tests , Service release tests , Types of CAD releases , Verification tests , Warning streamer , -
MIL-DTL-32145 VALID NOTICE 1
Abstract: This specification covers the requirements for two types of flyers\' ruggedized anti-exposure neck seal. Intended Use: The neck seal is military unique due to the neck seal\'s use with the continuous wear ...Subject(s) : Anti-exposure coveralls , Latex , PTFE laminate material , Sealing machine , heat , Shelf life , -
MIL-PRF-23586F
Abstract: This specification covers the requirements for electrical silicone rubber sealing compounds that are not resistant to fuel. These compounds are intended for use in the temperature range of −62 to +204°C (−80 ...Subject(s) : Electrical connectors , Heat cure , Repairability , Room temperature cure , -
MIL-HDBK-704-2 VALID NOTICE 1
Abstract: This handbook provides, as guidance, test methods used to demonstrate that single phase, 400 Hz, 115 volt utilization equipment is compatible with the electric power characteristics of the applicable edition(s) of MIL-STD-704. ...Subject(s) : Aircraft , electrical power , Aircraft , electrical test , Electrical operating areas , Equipment , utilization , Power groups , Specification , utilization equipment , -
A-A-59318
Abstract: This commercial item description (CID) covers a metal polish used for polishing unpainted aluminum and aluminum alloy surfaces of aircraft. The abrasive quality of the polish enables it to remove tarnish and produce a high ... -
MIL-T-85031B
Abstract: This specification establishes the design, performance, and acceptance requirements for the AN/DSM-96B Guided Weapon Test Set herein referred to as the test set. The test set is to be used at shore installations to verify ...Subject(s) : Antenna Shroud , Extended Range Data Link , Fuze Indicator , Fuze Order , Guidance Delay , Guided Weapon , Test Console , Walleye , -
A-A-59315/20
Abstract: This commercial item description sheet (CID) covers a nickel-chromium alloy powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-PRF-81904C
Abstract: This specification covers asbestos-free, thermal-insulating coating compound. The thermal protection coating is used for the exterior surfaces of aircraft ordnance to delay cook-off during exposure to a liquid fuel ...Subject(s) : Aircraft ordnance , High-flux thermal environment , Protection , -
MIL-B-85349
Abstract: This specification establishes the requirements for manufacture and acceptance of the MARK 60 MOD 1 Fuze Booster critical item, referred to herein as the booster. Intended Use: The booster is intended for ... -
DI-SESS-81527B
Abstract: Use/relationship: The Training System Support Document provides complete procedures for utilization of all software utility programs, support software file generation, and system performance characteristics ... -
MIL-DTL-18240F
Abstract: This specification defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, UNJF, UNRC or UNRF threads and ...Subject(s) : Patch , Plug/Pellet , Strip , -
MIL-H-4495D
Abstract: This specification contains the design and test requirements of flexible hose assemblies for use in aerial refueling systems. Intended Use: The hose assembly covered by this specification is intended to be ... -
MIL-C-22520/32
Abstract: This specification is approved for use by the Department of the Air Force, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the crimping ...