Show simple item record

LIGHT SYSTEMS, AIRCRAFT, ANTI-COLLISION, STROBE, GENERAL SPECIFICATION FOR

contributor authorNAVY - AS - Naval Air Systems Command
date accessioned2017-09-04T17:48:16Z
date available2017-09-04T17:48:16Z
date copyright06/30/1983
date issued1983
identifier otherEQQPDAAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std;jsery=autho162s7D8308/handle/yse/171445
description abstractThis specification covers the general requirements for two types of anti-collision, aircraft lighting strobe systems. The lighting system shall be defined as the total number of lightheads and power supplies required to provide 360° protective lighting in the horizontal plane of the aircraft. Vertical protective lighting coverage provided by the lighting system is dependent on the system selected in accordance with the applicable specification sheet.
Strobe anti-collision, aircraft light systems shall be of the following types, as specified (see 6.2):
          Type I - For use with 28 volt direct current (VDC) aircraft                    power source            Type II - For use with one phase of a three phase 115 volt                     alternating current (VAC) 400 hertz (Hz) aircraft                     power source


Intended Use: The strobe anti-collosion aircraft light system is intended to be suitable as a supplement to or replace existing anti-collision lighting system(s) as a means to reduce the risk of mid-air collisions through visual detection of nearby aircraft.
languageEnglish
titleMIL-L-85314Anum
titleLIGHT SYSTEMS, AIRCRAFT, ANTI-COLLISION, STROBE, GENERAL SPECIFICATION FORen
typestandard
page20
statusActive
treeNAVY - AS - Naval Air Systems Command:;1983
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record