درباره ما
MIL-STD-286C CHG NOTICE 2
PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING
Year: 2010
Abstract: This standard describes the general methods of sampling, examining, and testing solid propellants.
The test methods contained in this standard shall apply to the testing of solid propellants for conformance to the chemical and physical requirements of the applicable propellant specifications. In the event of conflict between these methods and those in the applicable propellant specifications, the latter shall take precedence.
This method is used for determining the moisture and volatile solvent content of single-base propellants on the basis of loss of weight on heating at 55° C under vacuum. This method is not suitable for large grain propellants.
This method is used for determining the tin content of propellants. The presence of other metals that react with iodine will cause interference.
This method is used for determining the potassium sulfate or potassium nitrate content in propellants. Intended Use: The intented use of this standard is, to describe the sampling, examining and testing, for solid propellant.
The test methods contained in this standard shall apply to the testing of solid propellants for conformance to the chemical and physical requirements of the applicable propellant specifications. In the event of conflict between these methods and those in the applicable propellant specifications, the latter shall take precedence.
This method is used for determining the moisture and volatile solvent content of single-base propellants on the basis of loss of weight on heating at 55° C under vacuum. This method is not suitable for large grain propellants.
This method is used for determining the tin content of propellants. The presence of other metals that react with iodine will cause interference.
This method is used for determining the potassium sulfate or potassium nitrate content in propellants. Intended Use: The intented use of this standard is, to describe the sampling, examining and testing, for solid propellant.
Subject: Composition Analysis
-
Statistics
MIL-STD-286C CHG NOTICE 2
Show full item record
| contributor author | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center | |
| date accessioned | 2017-09-04T17:46:11Z | |
| date available | 2017-09-04T17:46:11Z | |
| date copyright | 40464 | |
| date issued | 2010 | |
| identifier other | ELHGBDAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsery=autho162sear79D40AC42/handle/yse/169381 | |
| description abstract | This standard describes the general methods of sampling, examining, and testing solid propellants. The test methods contained in this standard shall apply to the testing of solid propellants for conformance to the chemical and physical requirements of the applicable propellant specifications. In the event of conflict between these methods and those in the applicable propellant specifications, the latter shall take precedence. This method is used for determining the moisture and volatile solvent content of single-base propellants on the basis of loss of weight on heating at 55° C under vacuum. This method is not suitable for large grain propellants. This method is used for determining the tin content of propellants. The presence of other metals that react with iodine will cause interference. This method is used for determining the potassium sulfate or potassium nitrate content in propellants. Intended Use: The intented use of this standard is, to describe the sampling, examining and testing, for solid propellant. | |
| language | English | |
| title | MIL-STD-286C CHG NOTICE 2 | num |
| title | PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING | en |
| type | standard | |
| page | 416 | |
| status | Active | |
| tree | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;2010 | |
| contenttype | fulltext | |
| subject keywords | Composition Analysis | |
| subject keywords | Indicator Solution | |
| subject keywords | Propellant Testing |