MIL-L-48176B

Abstract

This specification covers liners which essentially consist of titanium dioxide and wax on cartridge cloth or scrim for use in tank and artillery cartridges (see <a>6.1</a>). <br>Liners covered by this specification shall be of the following types: </span><pre> Type I -Army Drawing No. 8865255 - for 90MM Type II -Army Drawing No. 8880408 - for 90MM Type III -Army Drawing No. 9217050 - for 105MM Type IV -Army Drawing No. 9282787 - for 105MM Type V -Army Drawing No. 9278961 - for 155MM Type VI -Army Drawing No. 9285416 - for 155MM Type VII -Army Drawing No. 9207962 (or Army Drawing No. 9217039, Alternate - for 175MM Type VIII -Army Drawing No. 9277174 - for 8 Inch Type IX -Army Drawing No. 9312728 - for 8 Inch Type X -Army Drawing No. 9343011 - for 105MM Type XI -Army Drawing No. 9378133 - for 155MM Type XII -Army Drawing No. 9349808 - for 105MM</pre> <br> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, US Army Armament Research and Development Center Attn. AMSMC-QA, Dover, New Jersey 07801 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <br><b><u>Intended Use:</u></b> The additive liners covered by this specification are intended for use in the following cartridges: <pre> M431A2 Heat-T Cartridge (90MM) M318A1, M353A1 TP-T Cartridge (90MM) M490, M456A1, M735, M774, M833 Cartridge (105MM) M490A1 Cartridge (105MM) M724A1 M728, M392A1 APDS-T Cartridge (105MM) M203 Propelling charge (155MM) M203E2 Propelling charge (155MM) XM201E5 Propelling charge (155MM) M86A2 Propelling charge (175MM) M188 Propelling charge (8 Inch) M188E1 (A1) Propelling charge (8 Inch)</pre> <br>