NATO - North Atlantic Treaty Organization: Recent submissions

Now showing items 421-440 of 1523

    • NATO STANAG 4664 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2012
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      This STANAG is one of three STANAGs, 4662, 4663 and 4664 for the exchange of environmental data. It adopts and implements, within NATO, the SEDRIS Technology, which was developed by the International ...

    • NATO AQAP 2000 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2009
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: This document should be used, as a part of the overall policy of an organisation, to assure the quality of life cycle processes, products2 and services. This document is not intended to be used as a contractual ...

    • NATO AFLP-7 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2007
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this chapter is to define the technical requirements of the NATO TFHE Capability Areas and their Supporting Modules.

    • NATO STANAG 7119 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2009
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to achieve easier development, improved maintenance, and a decrease in life cycle costs of avionics systems by using a generic open architecture framework, the SAE Aerospace ...

    • NATO STANAG 2399 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1992
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to outline NATO operational procedures for recovery and evacuation operations.

    • NATO STANAG 2034 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2000
      Organization : NATO - North Atlantic Treaty Organization

    • NATO STANAG 3977 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2009
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to register national acceptance of AEP-6(F).

    • NATO STANAG 2235 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2012
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      BUT The aim of this NATO standardization agreement (STANAG) is to respond to the following interoperability requirements.

    • NATO STANAG 3677 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2000
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to standardise the scales for land maps and aeronautical charts.

    • NATO STANAG 2257 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1993
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to standardize the presentation of the Military Geographic Documentation (MGD) on railways, and to ensure that it can be readily used by NATO Forces with the minimum of special training. ...

    • NATO STANAG 2546 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2008
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to register national acceptance of AJMedP-2.

    • NATO STANAG 4526 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2004
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The Aim of this agreement is:
      a. To provide a standard test procedure for determining the degree of reaction, if any, of a munition when hit by a typical top attack bomblet shaped charge jet;
      b. To provide ...

    • NATO AFSP-1(A) 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2007
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM OF AVIATION SAFETY
      The aim of aviation safety is to increase the operational efficiency of any aviation force by reducing to a minimum those risks which contribute to aircraft occurrences ...

    • NATO STANAG 7095 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2003
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: Scope:
      The aim of this agreement is to standardize the terminology and requirements for flat panel displays.

    • NATO AJP-3.2.3.3 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2009
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: The scope of this publication is limited to AI, CAS and directly related activities as part of Anti Surface Force Air Operations (ASFAO) as outlined in AJP-01 and other AJPs concerning joint operations, e.g. AJP-3.3.

    • NATO AASTP-3 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1995
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: This Manual describes the considerations and criteria used to assess the correct Hazard Division and Compatibility Group for a given substance or article (the Classification Code), to calculate the Net Explosive Quantity ...

    • NATO STANAG 4381 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1994
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this Agreement is to provide guidance for member nations in the design and application of blackout lighting systems on tactical land vehicles.

    • NATO ANEP-28 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1991
      Organization : NATO - North Atlantic Treaty Organization

    • NATO STANAG 3752 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1989
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to standardize materials, dimensions, and mechanical requirements of witness (breaking) wire when used for the temporary locking of aircraft emergency controls and equipments.

    • NATO AMEDP-23 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2008
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this publication is to provide information on:
      national responsibilities for the vaccination of their forces, and
      national capabilities for vaccinations