Now showing items 41-60 of 732

    • MIL-T-14038K 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1991
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers two types of rectangular, hip-roofed, pole supported, off-center ridge, general purpose tents. The tent has the following dimensions, when erected with poles, designed for use with them: Length ...
      Subject(s) : Shelter ,
    • MIL-C-43681A VALID NOTICE 1 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1988
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • O-I-568D 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1969
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers insecticide, dichlorodiphenyltrichloroethane (DDT), 75 percent, water-dispersible powder, suitable for use, when dispersed in water, as a residual spray for the control of mosquitoes, and fleas.
    • MIL-I-11489E VALID NOTICE 1 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1989
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • PPP-C-96E 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1992
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification and appendix thereto cover the requirements for new metal cans made of 28 gage and lighter sheet metal plate, and DOT 2P and 2Q metal containers suitable for packaging and packing items for shipment and ...
      Subject(s) : Can closure , Double seamed ends , Drawn body , Friction plug , Hand opening , Key opening , Lid , Lids reclosure , Packers can , Rigid spout , Screw cap , Slip cover , Snap-on ,
    • MIL-STD-1494B 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1988
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • MIL-DTL-32221A 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;2009
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers a shelf stable filled bakery item in a flexible pouch intended for use by the Department of Defense as a component of operational rations.
      Subject(s) : Combat field feeding , Pouch bread ,
    • MIL-B-43878 VALID NOTICE 4 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1993
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • A-A-59129A 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;2008
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This commercial item description (CID) covers a manually operated can crusher.Intended Use: The can crusher is intended to crush round food cans. The types I, II, and III crushers are used for crushing all ...
    • A-A-50174 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1988
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: The General Services Administration has authorized the use of this commercial item description in preference to item 2 of MIL-C-43467. Intended Use: The candlelighter and snuffer covered by this ...
    • FED-STD-314 CHG NOTICE 1 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1971
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • P-D-410C 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1977
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers concentrated, non abrasive, synthetic organic detergents for use in hand dish washingIntended Use: Types I and II dishwashing compounds covered by this specification are intended to ...
    • MIL-M-2418G 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1990
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • P-C-1891 INT AMD 1 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1977
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • A-A-20030A 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1991
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: The U.S. Department of Agriculture has authorized the use of this Commercial Item Description in preference to Military Specification MIL-S-44149.
      This Commercial Item Description (CID) covers salad ...
    • MIL-P-44403 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1990
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers the requirements for two types of passageways for the complexing kit. Intended Use: The passageway, complexing kit shall be used as a passageway between two ISO shelters or between ...
      Subject(s) : connector , covered shelter , Hallway , ISO , kit , TEMPER , tent ,
    • MIL-W-43001F 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1987
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • MIL-B-44155B 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1991
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers body armor coats for the Explosive Ordnance Disposal (EOD) system. The coat includes an insert of aramid ballistic filler enclosed in an oxford aramid cloth shell. This is a special purpose Life ...
      Subject(s) : Aramid , Ballistic protection , IED , Improvised explosive device , Life support clothing , LSC&E , Protective clothing , Unexploded ordnance , UXO ,
    • FED-STD-236A 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1969
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This standard establishes the criteria and procedures which shall govern the cleaning, sterilizing, repairing, renovating and rebuilding of cotton felted mattresses by contract service.
    • MIL-STD-655D 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1992
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This standard will be made applicable to contracts by reference in the appropriate cloth documents.
      Subject(s) : Examination , Fabric defect , Inspection , PFEQ ,