ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate: Recent submissions

Now showing items 141-160 of 179

    • MIL-HDBK-728/3 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1985
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: INTRODUCTION
      Liquid penetrant testing is one of the more extensively used NDT methods. It is used to find surface and is fairly rapid and inexpensive even for large parts. It is often called "dye penetrant" or ...

    • MIL-HDBK-788 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1993
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-64154B (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2012
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers a fiberglass-fabric-reinforced Phenolic laminate for use in composite armor systemsIntended Use: The laminates furnished under this specification are military unique because they are ...
      Subject(s) : Ballistic resistance , Composite armor , Peel-ply , Resin ,

    • MIL-DTL-46063H (2) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2000
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-32332 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2009
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers quenched or quenched and tempered ultra-high-hardness (UHA) wrought steel armor plate for lightweight armor applications for ordered thicknesses from 0.118 inches (3 mm) up to an ordered thickness ...
      Subject(s) : Ballistic testing , Batch tempering , Continuous tempering , Heat treated , Lightweight material ,

    • MIL-P-14571A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1960
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers requirements for parts fabricated from qualified modified polystyrene plastic conforming to Specification L-M-525. Intended Use: Parts should be made of modified polystyrene (see ...

    • MIL-A-46099C 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1987
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers roll-bonded, dual hardness, steel armor plate for lightweight armor applications (see 6.1). Intended Use: The roll-bonded steel armor covered by this specification is intended ...
      Subject(s) : Dual-hardness , Plate , Roll bonded , Steel armor ,

    • MIL-DTL-53022E 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2012
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers a flash drying, corrosion inhibiting epoxy primer for ferrous and nonferrous substrates. The primer is lead and chromate free and meets the air pollution requirements for solvent emissions.Intended ...
      Subject(s) : Aluminum , Camouflage system , HAP , Metal , Panels , Steel , VOC ,

    • MIL-HDBK-728/2 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1985
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: INTRODUCTION Eddy current testing is one of the standard nondestructive testing methods. It uses electromagnetic fields and is very aenaitive to many material and geometric variables. Because it is an electromagnetic test, ...

    • MIL-HDBK-728/3 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1992
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-T-13915E VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1994
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • L-P-527B NOTICE 2 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-13924D 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1999
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary preservative treatment (see ...
      Subject(s) : Chromic acid dip , Chromium compounds , Embrittlement relief , Oxalic acid spot test , Preservative , Salt spray , Smut test ,

    • MIL-HDBK-17-5 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2002
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract:
      For Department of Defense purposes, this handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This mandate is a DoD requirement only; it is ...

    • MIL-HDBK-728/1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1985
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: 1. This Military Handbook is approved for use by all Departments and Agencies of the Department of Defense.
      2. This publication was approved on 21 October 1985 for printing and inclusion in the military standardization ...

    • MIL-HDBK-699B 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1989
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: FOREWORD
      The purpose of this handbook is to provide information concerning all known -~ Federal, Military and nationally recognized technical society specifications for flexible rubber products. ...

    • L-P-1040B NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-12235A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2009
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers plate-proofing projectiles made from steel and aluminum bar stock for use in impacting or shock-testing armor, armor weldments, and other armor structures (see 6.1).Intended Use: The ...
      Subject(s) : Aluminum , Armor , Ballistic , Body armor , Steel , Weldment ,

    • MIL-P-46183 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2004
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-P-46183 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1984
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers polyetheretherketone (PEEK) thermoplastic materials suitable for injection molding or extrusion (See 6.1). Intended Use: Polyetheretherketone (PEEK) thermoplastic materials ...