درباره ما
NACE - NACE International: Recent submissions
Now showing items 221-240 of 344
-
NACE 43114
Abstract: Introduction
Coating manufacturers and the contracting authority have an interest in establishing the parameters that define satisfactory performance of specified coatings.
Therefore, soluble-salt ... -
NACE SP0308
Abstract: A corrosion survey of a reinforced concrete structure is often a component of a large condition and rating process. It is important that the information collected during the corrosion survey is concise and clearly presented. ... -
NACE TM0204
Abstract: General
This standard test method covers exterior protective coatings for offshore platÃorm steel structures, piers, docks, pilings, subsea valves, and wellheads at normal seawater temperature. ... -
NACE RP0287
Abstract: General
This standard describes a procedure for on-site measurement of the surface profile of abrasive blast-cleaned steel surfaces that have a surface profile, as defined in Section 2, between 38 and ... -
NACE 1F192
Abstract: General
Definitions: The definitions used in this version are based on those in NACE/ASTM(1) G193 "Standard Terminology and Acronyms Relating to Corrosion." Therefore, the ... -
NACE 34101
Abstract: Introduction
Many different types of process additives are used to maintain reliability and optimal performance of refinery operations. An additive can be a proprietary chemical such as a corrosion ... -
NACE TM0374
Abstract: The test methods described in this standard are static laboratory screening tests designed to give a measure of the ability of scale inhibitors to prevent the precipitation of calcium carbonate and calcium sulfate from ... -
NACE SP0273
Abstract: This standard presents guidelines for minimizing acid corrosion, including general corrosion, pitting, and stress corrosion cracking (SCC), in the oil field. Topics covered include preparation of the well, preparation ... -
NACE SP0176
Abstract: Foreword
Offshore structures represent large capital investments. Structures are being placed in offshore areas worldwide and are being designed to withstand forces resulting from hurricanes, arctic ... -
NACE SP0199
Abstract: General
This standard provides technical and quality assurance guidelines for the fabrication, welding, and installation of stainless chromium-nickel steel and nickel-alloy roll-bonded and explosion-bonded ... -
NACE SP0110
Abstract: Introduction
This standard covers the NACE internal corrosion direct assessment (ICDA) process for wet natural gas pipeline systems (i.e., WG-ICDA). It is intended to serve as a guide for applying the WG-ICDA process ... -
NACE 5A171
Abstract: INTRODUCTION
AqHF is commercially available in 49% and 70% solutions. Commercial AHF contains less than 400 parts per million by weight (ppmw) water. Although this report is intended as a guide for ... -
NACE TM0294
Abstract: This NACE International standard has been prepared to provide users and manufacturers of embeddable anodes with a test method for evaluating the anode material to an expected lifetime criterion. It is applicable to embeddable ... -
NACE TM0106
Abstract: General
This standard describes types of microorganisms, mechanisms by which MIC occurs, methods of testing for the presence of bacteria, research results, and interpretation of testing results for ... -
NACE SP0492
Abstract: General
This standard defines minimum physical quality and inspection requirements for bracelet galvanic anodes for offshore pipeline applications, including risers and J-tubes.
This standard is ... -
NACE 6G186
Abstract: Introduction
Long-term coating performance is directly related to proper coating material selection, correct coating formulation, appropriate and adequate surface preparation, and satisfactory coating ... -
NACE 35108
Abstract: Introduction
In February 2000, NACE Work Group T-10A-3b sent questionnaires to 49 CP practitioners and users regarding the use of the 100 mV cathodic polarization criterion.3 In this report, a summary ... -
NACE 34105
Abstract: Introduction
Most chloride salts in the crude oil coming into a refinery are inorganic (sodium, magnesium, or calcium chloride) and are effectively removed by the desalter. The nonextractable chlorides ... -
NACE 35100
Abstract: Foreword
In-line inspection is an important tool in the investigation of the condition of a pipeline. It is a significant part of pipeline integrity management and, as such, complements a quality ... -
NACE TM0111
Abstract: General
This standard establishes a SSR test method for evaluating susceptibility of carbon steels to ethanol SCC. It relates to the evaluation of SCC that may be observed in equipment involved in ...