درباره ما
NACE - NACE International: Recent submissions
Now showing items 281-300 of 344
-
NACE MR0175/ISO 15156 CIR 3 TO PT 3
Abstract: This part of ANSI/NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas ... -
NACE 31215
Abstract: Introduction
A corrosion inhibitor is a substance that, when added in small concentrations to a corrosive environment, reduces the corrosion rate of a metal in that environment. Commercial inhibitor ... -
NACE 1D182
Abstract: Introduction
The test method presented herein (the so-called "wheel test"1,2,3) is versatile in that it has often been adjusted to test a variety of inhibitors and has been performed on ... -
NACE MR0175/ISO 15156 CIR 1 TO PT 3
Abstract: Foreword
The establishment of the NACE/ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving ... -
NACE 05101
Abstract: Introduction
Field investigations by Romanoff and other researchers at the National Institute of Standards and Technology (NIST)(formerly the National Bureau of Standards [NBS])(1) in the ... -
NACE SP0575
Abstract: General
This standard presents recommended practices for the cathodic protection (CP) of internal surfaces of oil-treating vessels, heat exchangers, or the water side of process vessels.
The ... -
NACE SP0187
Abstract: Scope and Limitations
Because of the concrete damage caused by the corrosion products formed on reinforcing steel, the designer should consider certain corrosion criteria during the design of the structure. Design and ... -
NACE 8X294
Abstract: Foreword
This NACE technical committee report summarizes results of laboratory tests and investigations of field and plant experience presented in various sources of the published literature pertaining ... -
NACE RP0402
Abstract: This standard presents guidelines for establishing minimum requirements to ensure proper application and performance of a field-applied fusion-bonded epoxy (FBE) coating system to the external surfaces of pipe at girth ... -
NACE SP0169
Abstract: General
This standard presents accepted methods and practices for the control of external corrosion on buried or submerged steel, stainless steel, cast iron, ductile iron, copper, and aluminum ... -
NACE TM0298
Abstract: General
This standard presents a procedure for the evaluation of fiber-reinforced plastic (FRP) pipe and tubulars for use in oilfield service. FRP pipe systems include the pipe or tube body, connections, ... -
NACE TM0102
Abstract: This standard test method presents guidelines and procedures for use primarily by corrosion control personnel in the pipeline industry to determine the general condition of a pipeline coating. These techniques are used to ... -
NACE TM0397
Abstract: General
The test methods described in this standard are static laboratory screening tests designed to measure the ability of chemicals to remove gypsum scale deposits. There are two types of scale-removal ... -
NACE 7H100
Abstract: Introduction
Deposits or scale on the water/steam sides of boiler tubes result from in situ oxidation of the tube material, transport and precipitation of corrosion products from other locations within ... -
NACE 1D199
Abstract: General
Corrosion monitoring techniques can be divided into intrusive and nonintrusive methods. Intrusive methods are those that access the inside of a system. Nonintrusive systems do not require ... -
NACE 7L192
Abstract: Introduction
The development of offshore energy resources is rapidly moving into water depths of 3,000 m (10,000 ft) and greater. This trend to deep water energy resources is a direct response to ... -
NACE 43107
Abstract: Foreword
This state-of-the-art report reviews the current information available concerning solvent-free coatings, their application to railcars, and the use of plural-component spray equipment. It is ... -
NACE TM0194
Abstract: This standard describes field test methods for estimating bacterial populations commonly found in oil and gas systems. Although these techniques have been successful in the oil field, they are not the only methods that ... -
NACE SP0490
Abstract: This standard presents recommended techniques in the operation of holiday detector equipment currently used on fusion-bonded epoxy (FBE) pipeline coatings following shop application of the coating and prior to on-site ... -
NACE 08113
Abstract: Foreword
An increasing number of wastewater structures, systems, and components are experiencing extreme corrosion and deterioration. Hydrogen sulfide (H2S) corrosion and microbiologically influenced ...