درباره ما
AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF): Recent submissions
Now showing items 101-120 of 461
-
A-A-58065B VALID NOTICE 1
Abstract: This Commercial Item Description (CID) covers a stationary, hydraulic motor driven mounter-demounter for tube-type or tubeless tires used on trucks, busses, tractors, and earth moving equipment. -
MIL-L-4448
Abstract: This specification covers a heavy-duty metal cutting geared head sliding bed gap lathe, electric motor driven, substantially in accordance with Figure 1; with equipment and accessories as described herein, with or ... -
A-A-59120
Abstract: This Commercial Item Description (CID) covers a gauge for checking surface plate wear, including a master reference gauge calibrator, complete with protector cases and covers. Intended Use: The intended use ... -
MIL-PRF-83041C VALID NOTICE 1
Abstract: This performance specification outlines the minimum requirements for a horizontal or vertical, liquid fuel separator with a maximum flow rate of 600 gallons per minute (gpm) ± 10%. This FFU-15/E filter separator is ...Subject(s) : Air eliminator , Coalescer , Differential pressure gauge , Ground rod , Spider assembly , Water slug valve , -
A-A-59283A
Abstract: This Commercial Item Description (CID) describes an eight-channel power line monitor. This CID is meant as a minimum requirement for the power line monitor in which only those manufactures meeting or surpassing the following ... -
MIL-PRF-87978A
Abstract: This specification establishes the requirements for two types of tank type paint removers for use on aircraft wheels and landing gear components at ambient temperature.
Paint remover covered by this specification shall ...Subject(s) : Biodegradable , Cadmium , Dichromate , Hydrogen embrittlement , Solvent , Surfactant , Viscosity , -
A-A-59876
Abstract: This document describes performance requirements for a Torque Wrench Calibrator, and associated dead-weight calibration equipment. The Torque Wrench Calibrator consists of two separate "stations". The two stations of the ...Subject(s) : Dual station usage , Dynamometers , Force gages , -
A-A-58032 VALID NOTICE 1
Abstract: This CID, describes a Test Set, Electrical Power. This CID is meant as a minimum requirement for the Test Set, Electrical Power in which only those manufacturers that meet or surpass the following requirements are qualified ... -
A-A-58083A
Abstract: This commercial item description covers the general requirements for a 114 inch lift height, diesel engine driven, rough terrain, four wheel drive, pneumatic tired, 6,000 pound at 24 inch load-center capacity, forklift ...Subject(s) : 24 inch load center , Diesel , Pneumatic , Rough terrain , -
A-A-59603
Abstract: The Testing Kit is a complete kit providing a quick, easy method for determining the volume percent of fuel system icing inhibitor (FSII). -
A-A-58074 VALID NOTICE 1
Abstract: This commercial item description covers the minimum performance requirements for a portable ultrasonic test set used for ultrasonic bond testing equipment of metallic and nonmetallic composite material. -
MIL-STD-1839D
Abstract: Purpose. This standard describes the requirement to provide a means for calibration and measurement traceability of all system, subsystem, and equipment. From this point on in this document, the word system will ...Subject(s) : Metrology , Parameters , Specifications , Standards , Test Accuracy Ratio , Test uncertainty ratio , Tests , Traceability , Uncertainty , -
MIL-PRF-26139D
Abstract: This specification covers two types of aircraft pressurized cabin leakage testers, designated AF/M24T-3 and AF/M32T-1, as specified.Intended Use: The AF/M24T-3 or AF/M32T-1 testers covered by this specification ...Subject(s) : Diesel Engine , Electric Motor , -
A-A-50734B
Abstract: This commercial item description (CID), describes a Ruggedized Multimeter. This CID is meant as a minimum requirement for the Ruggedized Multimeter in which only those manufacturers that meet or surpass the following ... -
A-A-58054
Abstract: This commercial item description covers non-woven, non-metallic mats made of nylon fiber. The commercially available mats shall be suitable for cleaning, scouring, finishing, or preparing metal surfaces. -
A-A-59870
Abstract: This CID describes a portable helium leak detector, which will be used to determine the location of leaks in fuel tanks as well as other aircraft systems. By filling a fuel tank or container with helium (the helium acts ...Subject(s) : Aircraft , Fuel tanks , Portable , Tracer , -
A-A-59761A VALID NOTICE 1
Abstract: This Commercial Item Description (CID) describes a 1.8 GHz to 4.5 GHz Signal Generator, hereinafter called the signal generator. The commercially available signal generator will be a laboratory standard, quality, bench ...Subject(s) : Calibration , Generator , Signal ,