Now showing items 161-180 of 461

    • A-A-58023 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description describes a portable exhaust gas analyzer used for measuring exhaust gas emissions from motor vehicles.
    • A-A-59380A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2002
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) outlines the minimum requirements for three types of hand-held wire rope (cable) tensiometers. The tensiometers will be used to measure static tension in aircraft control cables. The ...
    • A-A-59312C 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2006
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) covers the requirements for one type of Flight Line Tow Tractor (FLTT), hereafter referred to as tow tractor. The tow tractor is based on a commercial truck chassis, also known as a ...
      Subject(s) : Aircraft parking , Bobtail , Flight line , FLTT , Ground handling , Tug ,
    • A-A-58073 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) covers the minimum performance and technical requirements for a portable test set, ultrasonic for nondestructive flaw testing and thickness gauging of metallic and nonmetallic materials.
    • MIL-PRF-83990A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers general purpose, electrically heated thermal drying ovens for use in various heating, drying, and baking operations.
      The ovens will be of the following types, classes and styles as specified ...
      Subject(s) : Electric oven , Forced air , Gravity/convection air , Thermal drying , baking , or curing ,
    • A-A-59130 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This CID outlines the minimum requirements for a programmable spectrum analyzer, with up to 100 Hertz (Hz) resolution bandwidth, which operates in the 10 Kilohertz (KHz) to 50 Gigahertz (GHz) range. The spectrum analyzer's ...
    • A-A-59716 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This document covers a commercial, diesel engine driven, chassis-mounted, aircraft boarding staircase, to be used for passenger loading and unloading. The deck height of the staircase is adjustable to between 96 inches and ...
    • MIL-DTL-25959H 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers two types of aircraft cargo tie down tensioners and excludes cargo chains. The tie down tensioners are considered to be aircraft Critical Safety Items (CSI). Type I (10,000 lbs) and Type II (25,000 ...
    • A-A-59577 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2004
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID), describes Tester, Flash Point Closed Cup, ASTM D93 Method A and B. The flash point tester is used to measure and describe the properties of materials, products, or assemblies in ...
    • DI-TMSS-81641 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2003
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: Intended Use: This data package allows the calibration technical order writers to provide input to the government allowance standard monitor. The data provides recommended test equipment listing (TEL) for ...
    • MIL-S-21041C NOTICE 3 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1997
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • A-A-58083A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description covers the general requirements for a 114 inch lift height, diesel engine driven, rough terrain, four wheel drive, pneumatic tired, 6,000 pound at 24 inch load-center capacity, forklift ...
    • A-A-58057A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2013
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • A-A-58002A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) describes the minimum requirements for a Function Pulse Generator in which only those manufacturers meeting or surpassing the following requirements are supplied per this CID.
    • A-A-59795 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2007
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) covers the general requirements for a commercial, diesel-engine-driven, all-wheel-drive, pneumatic tired, rough terrain container handling forklift truck (RTCH). The RTCH will primarily ...
    • A-A-58047C 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2005
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) describes a 10 MHz to 26.5 GHz Signal Generator with AM, FM, pulse modulation (PM) and sweep capabilities. This CID is meant as a minimum requirement for the signal generator in which ...
      Subject(s) : Calibration , Generator , Signal ,
    • MIL-PRF-32055 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification is for a mobile tire inflation safety guard (MTISG) used for inflating aircraft tires. The MTISG will accommodate tire sizes up to and including 37X11.5R18 with a regulated tire shop pressure of 360 psi. ...
      Subject(s) : Aircraft tires , Blast , Debris , Explosion , Regulated , Separation , Wheel ,
    • MIL-STD-3036 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2013
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This standard establishes minimum military-unique test requirements necessary to evaluate the reliability and operational effectiveness of land-based Aircraft Arresting Systems (AASs) used within the United States Air Force ...
    • A-A-50652 REINST NOTICE 2 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2007
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description covers a life preserver. Intended Use: The life preserver covered by this commercial item description is intended to be used as emergency flotation gear by an adult or a child ...
    • A-A-58018 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)