Now showing items 61-80 of 461

    • MIL-T-58076 REINST NOTICE 4 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2006
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • MIL-J-25718B 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1969
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers one type of electrically heated container, designated Type CNU-2/CI for storing and serving beverages aboard long range aircraft.Intended Use: This insulated jug is intended to be ...
    • MIL-DTL-32392A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2013
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification establishes the minimum design, performance and test requirements for particular types of land-based Textile Aircraft Arresting Systems (TAASs) used within the United States Air Force (USAF).Intended ...
    • MIL-PRF-83817B 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This document covers a variable reach, rough terrain forklift truck with a 4,000 pound lift capacity at a reach of 23.5 feet which is air-transportable in C-130, C-17, and C-5 aircraft. The truck will be used primarily to ...
    • A-A-58077 CANC NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2013
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • A-A-59755A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2010
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID), describes a Radio Frequency (RF) Wattmeter. This CID is meant as a minimum requirement for the RF Wattmeter in which only those manufacturers that meet or surpass the following ...
      Subject(s) : Detachable load resistor , Insertion-type , Portable ,
    • GGG-P-453A (1) 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1979
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • A-A-58053 CANC NOTICE 2 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2013
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • A-A-59407A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) outlines the minimum technical and performance requirements for a Radio Test Set Group used to verify, test, and repair Life Support survival radios such as the AN/PRC-112, AN/PRC-90-2, ...
    • MIL-M-9915 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1961
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers plain and universal milling machines. Included are three sizes of each type. The machine is horizontal, electric motor driven, floor mounted, with equipment and accessories as described herein. ...
    • A-A-55437 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This description covers three types (sizes) of polyethylene covers (bags) used in the protective covering of system 463L palletized military airlifted cargo.
    • A-A-58090A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2008
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID), describes a VOR/ILS/MB signal generator. This CID is meant as a minimum requirement for the VOR/ILS/MB signal generator in which only those manufacturers that meet or surpass the ...
    • MIL-T-26193 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1957
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers one type of general cargo and air-transportable 4-wheel, 2-wheel steerable, 10,000-pound capacity stake trailer, designated AF/M32H-1. Intended Use: The AF/M32H-1 trailer covered ...
    • A-A-59111A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2009
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) describes a truck mounted aerial servicing platform for C-5 and C-17 aircraft maintenance and deicing. This servicing platform should conform to the requirements and provide the ...
      Subject(s) : Articulating Aerial Tower , Egress/ Ingress , Heavy Duty Chassis , HRMP , Work Vehicle ,
    • A-A-58054 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description covers non-woven, non-metallic mats made of nylon fiber. The commercially available mats shall be suitable for cleaning, scouring, finishing, or preparing metal surfaces.
    • A-A-58028D 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2010
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description (CID) covers a commercial hazardous materials (HazMat) truck. It has a 4x2 or a 4x4 chassis with a diesel engine and an automatic transmission; a cab with at least three doors which can ...
      Subject(s) : Chemical , Command , Control , Environment , Research ,
    • A-A-59818A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2009
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This CID covers a commercial light Aircraft Rescue and Fire Fighting (ARFF) vehicle designed for rapid intervention. It has a 4x4 chassis; a diesel engine; an automatic transmission; a three person cab with at least two ...
      Subject(s) : Ultra High Pressure ,
    • A-A-50730A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial Item description (CID), describes a laboratory standard quality bench piece of electronic test equipment which is a bench mount with rack mount option, solid-state, general purpose, 10 KHz to 1 GHz, generator ...
    • MIL-PRF-83990A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1997
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers general purpose, electrically heated thermal drying ovens for use in various heating, drying, and baking operations.
      The ovens will be of the following types, classes and styles as specified ...
      Subject(s) : Electric oven , Forced air , Gravity/convection air , Thermal drying , baking , or curing ,
    • MIL-PRF-32032A VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers one kind of a mobile high pressure hot water aircraft washer. An additional requirement is the washing of aerospace ground equipment and supporting and decontamination of aircraft exposed to ...
      Subject(s) : Foam generating system , Spray gun , Water supply tank ,