درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 321-340 of 36496
-
Standard Practice for Protection of Aircraft Systems from Intentional Unauthorized Electronic Interactions
Abstract: 4.1 The purpose of this practice is to establish methods that can be used to satisfy the Function and Installation requirements, and the Safety Requirements, provided in 4.1 and 4.2, respectively, in Specification F3061/F3061M. ... -
Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components
Abstract: 5.1 These test methods are intended to determine the ultimate failure load of a ceramic femoral knee component. This information can be used for evaluation of different ceramic component designs or different ceramic ... -
Standard Guide for Additive Manufacturing of Polymers — Material Extrusion — Recommendation for Material Handling and Evaluation of Static Mechanical Properties
Abstract: 4.1 As noted in many of the standards in Section 2, there are multiple factors that may influence the reported properties, including material choice, material anisotropy, methods of material storage and preparation, porosity, ... -
Standard Practice for Measuring Dynamic Characteristics of Water Slide Systems Using Instrumented Humans
Abstract: 4.1 This standard practice is intended for use whenever the dynamic characteristics of a water slide are to be determined using instrumented humans. 4.2 The use of this standard practice does not preclude the substitution ... -
Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
Abstract: This specification covers UNS N07716, N07725, N07773, N07776, N09777, and N09925 nickel alloy hot or cold finished rounds, squares, hexagons, rectangles, and cold finished wires. Bars should be supplied in solution treated ... -
Standard Test Methods for Metallic Bone Plates Used in Small Bone Fracture Fixation
Abstract: 4.1 Due to the variety of small bone fractures, plates used for the fixation of these fractures come in a variety of shapes and configurations. Table 1 categorizes the plate types for each anatomical area. Flat plates are ... -
Standard Guide for Total Knee Replacement Loading Profiles
Abstract: 4.1 The purpose of this test guide is to provide load profile information on how one could test a total knee replacement in order to evaluate in vitro its function and wear during several types of knee motions as described ... -
Standard Practice for Hayride Attractions
Abstract: 4.1 The purpose of this standard practice is to delineate requirements regarding the design, operation, maintenance and inspection of hayride attractions with the primary purpose of entertainment, recreation or agritourism. -
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
Abstract: This specification provides the chemical, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and alloy steel, in inch and metric dimensions, in two strength grades, two types and ... -
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
Abstract: 4.1 This test method can be used to describe the effects of materials, manufacturing, and design variables on the fatigue performance of metallic tibial trays subject to cyclic loading for relatively large numbers of cycles. ... -
Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
Abstract: A2.4 Significance and Use A2.4.1 This test method describes the testing procedure that shall be used to qualify material for use in ASTM F3111 bolts made of any steel composition permitted by this specification. The test ... -
Standard Specification for Structural Durability for Small Aeroplanes
Abstract: This specification is concerned with the airworthiness requirements related to structural durability for the design of small airplanes. The applicant for a design approval must seek individual guidance from their respective ... -
Standard Practice for Verification of Multi-Axis Force Measuring Platforms
Abstract: 5.1 Multi-axis force measuring platforms are used to measure the ground reaction forces produced at the interface between a subject's foot or shoe and the supporting ground surface. These platforms are used in various ... -
Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
Abstract: This specification covers round, zinc-aluminum mischmetal (Zn-5Al-MM) alloy-coated, steel core wire with three classes of this coating used for mechanical reinforcement in the manufacture of aluminum conductors, steel ... -
Standard Performance Specification for Tipover Restraint(s) Used with Clothing Storage Unit(s)
Abstract: This safety specification establishes the performance requirements for tipover restraint(s) used with clothing storage unit(s). It is intended to assess the strength of the tipover restraint only, and does not address the ... -
Standard Practices for Parasailing
Abstract: 3.1 The purpose of this standard is to establish procedures for water based parasailing activities. -
Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions
Abstract: 4.1 The objective of this document is to provide guidance in the production, characterization, testing, and standardization of: (1) polymerizable collagen starting materials; and (2) collagen polymeric materials produced ...