Show simple item record

SANITARY AND INDUSTRIAL WASTEWATER COLLECTION: PUMPING STATIONS AND FORCE MAINS

contributor authorUFC - Unified Facilities Criteria
date accessioned2017-09-04T18:50:28Z
date available2017-09-04T18:50:28Z
date copyright01/16/2004
date issued2004
identifier otherKUYOJBAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std;jsessionid=1B52F38963DAA552FFB5415FBAED6017/handle/yse/231953
description abstractPurpose and scope.
This manual provides guidance, instructions and criteria for the design of sanitary and industrial wastewater pumping facilities at fixed Army and Air Force installations, and any applicable special projects. Facilities covered in this manual include pump and ejector stations required for (1) removal of sanitary and industrial wastes from remote or low lying areas of the installation which cannot be served hydraulically by gravity sewers, (2) controlled introduction and lifting of raw wastewater into the waste treatment plant, (3) transfer of recycled and bypassed flows throughout the plant, and (4) discharge of treated effluent. Pumping systems for the handling of sludge, grit and scum are presented in TM 5-814-3/AFM 88-11, Vol. 3. The design of a wastewater pumping station will typically include site improvements, structures, screening and flow monitoring devices, pumping units, pump drives, system controls and instrumentation, mechanical and electrical components, interior piping, underground force mains, valves and appurtenances.
languageEnglish
titleUFC 3-240-08FAnum
titleSANITARY AND INDUSTRIAL WASTEWATER COLLECTION: PUMPING STATIONS AND FORCE MAINSen
typestandard
page35
statusActive
treeUFC - Unified Facilities Criteria:;2004
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record