Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 2 - Third Edition

Abstract

The establishment of the ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007.

A copy of the TMB Vote-Form Number: 34/2007 giving the rules of procedure for the maintenance agency can be obtained from the ISO TMB Secretariat.

It is also available from the ISO 15156 website at www.iso.org/iso15156maintenance.

ISO 15156 series has, since publication, been amended by a number of Technical Corrigenda and Technical Circulars and consists of the following parts, under the general title Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production:

- Part 1: General principles for selection of cracking-resistant materials (2015)

- Technical Circular 1, ISO 15156-1:2015/Cir.1:2017(E) (2017-12-22)

- Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (2015)

- Technical Circular 1, ISO 15156-2:2015/Cir.1:2017(E) (2017-12-22)

Technical Circular 2, ISO 15156-2:2015/Cir.1:2017(E) (2018-06-01)

Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (2015)

Technical Circular 1, ISO 15156-3:2015/Cir.1:2016(E) (2016-04-06)

Technical Circular 2, ISO 15156-3:2015/Cir.2:2018(E) (2018-06-01)